GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC660TBA024

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC660TBA024
Series: Genius I/O
UPC: 233195393026

Description:

The IC660TBA024 is a terminal assembly that works with the I/O module ICC660BBA024 made by GE Fanuc. This analog I/O block has a voltage rating of 24/48 Volts DC and is a terminal-only construction. The I/O module has two output circuits and four input circuits. The module's primary job is to operate the circuits by power delivered. The IC660TBA024 terminal assembly's output channels are equipped with 12-bit Analog to Digital converters (ADC) and are capable of controlling currents between 0 and 24 milliamps.


Key Features:

  • has voltage of 24/48 volts dc

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$521.00

Available: 1

What is Original Packaging

Your order will ship by . Need it faster?

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

GE Fanuc manufactures the IC660TBA024 block, which is an I/O module that uses a current power supply. This GE Fanuc's analog I/O block has a rated power of 24/48 Volts DC and is a terminal-only construction. The module's primary duty is to provide power to the circuits. Values that can scale linearly are supported by the circuits on the block. This analog I/O block is an industrial automation device featuring alarm detection, output hold, and selectable input conversion, among other adjustable capabilities. In terms of diagnostics, the IC660TBA024 I/O block is sophisticated, and it can quickly detect open wires, high/low alarms, under-range, over-range, and feedback faults. When both output circuits are earthed to the ground and the circuit loads are separated by a large distance, an additional resistor is used in each of the load's return lines. This configuration protects the block from probable damage caused by substantial voltage fluctuations between the ground connections. External resistors should have a resistance of 10 ohms.
 
On a normal cycle, the IC660TBA024 I/O block can dissipate up to 12 Watts of heat. Isolation from one block to another and from one group to another is 1500 V for 60-seconds and 300 V RMS for the module. The voltage of the power supply should be between 18- and 56-volts DC, with a maximum current rating of 600 milliamperes. With a DC voltage of 24/48 Volts, the module has a maximum ripple of 10% and a power supply drop-out time of 10 milliseconds. The architecture of the module is open. The temperature outside should not be more than 60 degrees Celsius. Alarm thresholds can be adjusted for specific input on the IC660TBA024 I/O block. When a particular limit is reached, a notification can be delivered to the operators. The device can also identify hardware problems and wiring issues. If a signal surpasses 25 milliamps, it can transmit an "OVERRANGE" message for under-range and over-range faults.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC660TBA024?

Answer: Yes. We offer repairs for the IC660TBA024 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC660TBA024?

Answer: If you buy the IC660TBA024 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC660TBA024 online?

Answer: Yes. Automation Stop sells the IC660TBA024 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC660TBA024?

Answer: The IC660TBA024 is made by Emerson - GE Fanuc.


Series information for IC660TBA024

For additional information about IC660TBA024 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC660TBA024.

Revision Part # Also Known As Availability
IC660TBA024L IC660TBA024 Series L, Rev L Request a Quote

Common Misspellings:

  • IC660TBAO24
  • IC660T8A024
  • IC660T8AO24
  • IC66OTBA024
  • IC66OTBAO24
  • IC66OT8A024
  • IC66OT8AO24
  • IC6G0TBA024
  • IC6G0TBAO24
  • IC6G0T8A024
  • IC6G0T8AO24
  • IC6GOTBA024
  • IC6GOTBAO24
  • IC6GOT8A024
  • IC6GOT8AO24
  • ICG60TBA024
  • ICG60TBAO24
  • ICG60T8A024
  • ICG60T8AO24
  • ICG6OTBA024
  • ICG6OTBAO24
  • ICG6OT8A024
  • ICG6OT8AO24
  • ICGG0TBA024
  • ICGG0TBAO24
  • ICGG0T8A024
  • ICGG0T8AO24
  • ICGGOTBA024
  • ICGGOTBAO24
  • ICGGOT8A024
  • ICGGOT8AO24
  • 1C660TBA024
  • 1C660TBAO24
  • 1C660T8A024
  • 1C660T8AO24
  • 1C66OTBA024
  • 1C66OTBAO24
  • 1C66OT8A024
  • 1C66OT8AO24
  • 1C6G0TBA024
  • 1C6G0TBAO24
  • 1C6G0T8A024
  • 1C6G0T8AO24
  • 1C6GOTBA024
  • 1C6GOTBAO24
  • 1C6GOT8A024
  • 1C6GOT8AO24
  • 1CG60TBA024
  • 1CG60TBAO24
  • 1CG60T8A024
  • 1CG60T8AO24
  • 1CG6OTBA024
  • 1CG6OTBAO24
  • 1CG6OT8A024
  • 1CG6OT8AO24
  • 1CGG0TBA024
  • 1CGG0TBAO24
  • 1CGG0T8A024
  • 1CGG0T8AO24
  • 1CGGOTBA024
  • 1CGGOTBAO24
  • 1CGGOT8A024
  • 1CGGOT8AO24

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP