The IC754VSF12CTD is a GE QuickPanel+ with a 12-inch Color TFT Touch Display operator interface. It is able to connect to most industrial equipment through the QuickPanel+ communications ports. It is equipped with many memory types to serve in the most demanding environments. General specifications for the IC754VSF12CTD include a Freescale i.MX535 Processor (1 GHz ARM Cortex A8), 512 Megabytes of DDR2 SDRAM, 256 Megabytes of SLC NAND ROM, and 512 Kilobytes of SRAM with battery backup. The IC754VSF12CTD also uses Microsoft Windows Embedded Compact 7 for its operating system; it uses a 7” Widescreen TFT LCD for its display type, has a resolution of 800(W) x 480(H) pixels WVGA, and uses LED technology for its backlight. The touchscreen on the IC754VSF12CTD has a projected capacitive touch panel type and two-point multi-touch. Communications for the IC754VSF12CTD are advanced, utilizing 1x 10/100BaseT (RJ-45) Ethernet port, 1x RS-232 UART Port (5-pin connector), two USB2.0 (Type-A) ports, and one USB 2.0 (Mini Type-B) port.

The IC754VSF12CTD has one SD/SDHC card slot for storage and has one microphone in (mono) and one line out (stereo) for its audio capabilities. This hardware has a maximum rated voltage of +30 Volts DC, a rated voltage of +24 Volts DC +/- 20% (3-pin connector), and has a power consumption of 15 Watts (maximum). Physical specifications for the IC754VSI12CTD include dimensions of 192 x 137 x 36 millimeters, or 7.56 x 5.39 x 1.42 inches. It has an approximate weight of 0.800 kilograms, or 1.76 pounds. Environmental specifications include natural convection cooling, an ambient operating temperature range between 0 and 50 degrees Celsius, and an ambient storage temperature between -20 and 60 degrees Celsius. Ambient humidity during operation and in storage is 85% (non-condensing). The IC754VSF12CTD receives an Environment Pollution Degree of 2 as defined by UL60950-1 and has an enclosure rating of IP65 and JEM1030 when installed in accordance with the manufacturer’s recommendations.

The IC754VSF12CTD is a Quick Panel Control and View Quick Panel terminal. The resolution of this device is 800 by 600 pixels. Users can interact with their machines, and other plant equipment using the touchscreen interface. Furthermore, it can also be used for monitoring the various industrial processes in advance. This Quick Panel terminal belongs to the operator interface products line. There is a flat panel display on this terminal. Supporting a total of 65,536 colors, it supports sixteen (16) bits per pixel. The screen size on this Quick Panel terminal is twelve (12) inches. It is able to provide a bright interface screen thanks to its built-in special mechanism. The touchscreen is primarily used to interact with the plant machines, and other industrial equipment. Users can also monitor industrial processes in advance using this Quick Panel Control and View Quick Panel Terminal. For optimal performance, the IC754VSF12CTD Quick Panel control and view terminal must be installed on a flat surface. It is almost similar to NEMA rated panel or enclosure. Also, it requires a space of three (3) inches on all sides. This is necessary for providing necessary ventilation, and air circulation to the terminal. It can be installed in an outdoor environment, however, if any of you choose to do so, make sure it is protected from direct sun light. The optimal operation temperature for this module must not exceed the ambient temperature. For ease of use, it comes equipped with a keyboard, touchscreen, and several communication ports.