GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | ST-3234 |
Series: | RSTi PacSystem |
UPC: | 799705804739 |
Description:
This input module was designed by GE Fanuc, and it has 16 bits resolution. The module can support 5 volts DC power supply and can draw a 165-milliampere current rating. It comes with 4 single-ended channels and supports 4 to 20 milliamperes for the analog input type. Additionally, it is equipped with LED indicators in many colors. The data format of this model is an integer, and it also supports Ethernet connectivity.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The ST-3234 is an input module that comes with four analog inputs. This model belongs to Emerson - GE Fanuc. It is also widely popular as an RSTi analog module. In addition, this input module comes with 14 bits resolution at a 4-millisecond rated speed. If supplied with a 5 volts DC power supply, it can draw 165 milliamperes of current. In addition, for human machine interaction, this model comes with LED indicators present in 4 green/red states and 1 green/red Fn-Bus state. The data format supported by this module is an integer, and the number of inputs supported is 4 channel single ended. The module weighs 70 grams and has physical dimensions that measure 12 mm x 99 mm x 70 mm. Because of its compact design, it is considered a durable product since it is both lightweight and easy to maintain. As a result, it will not occupy too much space, and the logistics will not be an issue either. In addition, this product is supported by Ethernet-based inputs. Hence, it can provide excellent performance and flexible operation to the users. The communication speed of this product is also robust since it can easily handle the huge amount of data to be transmitted that most of the devices usually generate in the automation and control setting. Overall, this input module is built for flexibility and is used to enhance secure connectivity, seamless integration, and durability over the long run. However, the users should strictly observe the guidelines for the installation to avoid any electrostatic discharge.
Question: Does Automation Stop offer repairs on the ST-3234?
Answer: Yes. We offer repairs for the ST-3234 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and ST-3234?
Answer: If you buy the ST-3234 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the ST-3234 online?
Answer: Yes. Automation Stop sells the ST-3234 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the ST-3234?
Answer: The ST-3234 is made by Emerson - GE Fanuc.
For additional information about ST-3234 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding ST-3234.
Revision Part # | Also Known As | Availability |
---|
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.