GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | ST-3708 |
Series: | RSTi PacSystem |
UPC: | 799705804838 |
Description:
Designed and manufactured by Allen Bradley / Rockwell Automation, part number ST-3708 is an analog input module that belongs to the RSTi PacSystem series of products. This device has 8 channels and 4 commons. The rated power dissipation of this module is a maximum of 100 milliamperes at 5.0 volts DC. This module weighs approximately 70 grams, and it has physical dimensions that measure 12 mm x 99 mm x 70 mm.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Product number ST-3708 is an analog input module that requires a 20-pin connector. This device belongs to the RSTi PacSystem series of products. It was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. This analog input module has a PT100/1000 sensor. This module has a total of eight (8) channels, as well as four (4) commons. It is equipped with multiple LED, or light emitting diode, indicators. These LED indicators include one (1) green/red LED for the module status and eight (8) green LEDs for the input status. This Allen Bradley module has a 16-bit singed integer data format. The conversion time of this device is thirty (30) milliseconds for each channel. The accuracy of this device is rated as plus or minus (+/-) 0.1 percent Full Scale at 25 degrees Celsius, as well as plus or minus (+/-) 0.3 percent Full Scale at 0 degrees Celsius and 60 degrees Celsius. The maximum power dissipation of this device is one hundred (100) milliamperes at 5.0 volts direct current (DC). This device features an I/O to Control Logic photo coupler isolation. This module has an approximate weight of seventy (70) grams, or the equivalent of 1.06 ounces. The Allen Bradley ST-3708 analog input module has physical dimensions that measure 12 millimeters x 99 millimeters x 70 millimeters. This module should be operated in an environment where the temperature ranges from 0 to 60 degrees Celsius. However, when being stored, the temperature of the environment should range from -40 to 85 degrees Celsius.
Question: Does Automation Stop offer repairs on the ST-3708?
Answer: Yes. We offer repairs for the ST-3708 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and ST-3708?
Answer: If you buy the ST-3708 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the ST-3708 online?
Answer: Yes. Automation Stop sells the ST-3708 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the ST-3708?
Answer: The ST-3708 is made by Emerson - GE Fanuc.
For additional information about ST-3708 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding ST-3708.
Revision Part # | Also Known As | Availability |
---|---|---|
ST-3708-BE | ST-3708 Series BE, Rev BE | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.