GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | STXMBE001 |
Series: | RSTi PacSystem |
UPC: | 799705805415 |
Description:
The GE Fanuc STXMBE001 is a PacSystems RSTi MODBUS TCP/IP network adapter with one port. This device supports 16 connections. The power supply is rated at 24 volts DC nominal with a backplane power of 1.5 amperes to the I/O modules. This device has a maximum input and output byte size of 252 bytes. The weight of this device is approximately 150 grams. The physical dimensions of this product measure 45 mm x 99 mm x 70 mm.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The STXMBE001 is a GE Fanuc PacSystems RSTi MODBUS device. More specifically, though, this device is a MODBUS TCP/IP network adapter that with comes with I/O modules. MODBUS TCP/IP stands for Transmission Control Protocol and Internet Protocol, which, in essence, is just a MODBUS RTU protocol, which is an open standard protocol, meaning the manufacturer can change and renew equipment without having to pay any royalties, with a TCP interface, which connects network devices on the internet with a private computer network, running on an Ethernet connection. Part number STXMBE001 can support up to 16 connections and has one (1) port for the MODBUS TCP slave network, which has an Ethernet Shielded RJ-45 cable that stretches up to 100 meters from the Ethernet Hub. The communication network can have either a line or star topology with the maximum number of nodes limited by the IP address. The data transfer and communication rate is 10/100 Mbps. The operating mode has 8 MODBUS TCP, 4 of HTTP, and a single BOOTP. The I/O modules can be up to 32 with a maximum of 2016 of digital I/O points, 126 of I/O analog channels, and a maximum input byte size of 252 bytes. The DC module power is rated at 24 volts nominal, with a voltage range of 11 to 28.8 volts DC, as well as a backplane current of 1.5 amperes to the I/O modules. At 24 volts DC, the power dissipation is typically 60 milliamperes and the field power is a Class II with a current of 10 amperes at 24 volts DC nominal.
Question: Does Automation Stop offer repairs on the STXMBE001?
Answer: Yes. We offer repairs for the STXMBE001 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and STXMBE001?
Answer: If you buy the STXMBE001 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the STXMBE001 online?
Answer: Yes. Automation Stop sells the STXMBE001 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the STXMBE001?
Answer: The STXMBE001 is made by Emerson - GE Fanuc.
For additional information about STXMBE001 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding STXMBE001.
Revision Part # | Also Known As | Availability |
---|---|---|
STXMBE001-BB | STXMBE001 Series BB, Rev BB | Request a Quote |
STXMBE001-CB | STXMBE001 Series CB, Rev CB | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.