GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC694ACC300 |
Series: | RX3i PacSystem |
UPC: | 799705802988 |
Description:
Item number IC694ACC300 is a voltage input simulator that was produced by Emerson - GE Fanuc as part of the RX3i PacSystem I/O family. It does not have backplane restrictions. This device occupies one slot on the backplane and has 16 points. Response time for ON is 20 milliseconds while for OFF, the response time is 30 milliseconds. It has switch type connectors, with LED indicators for the on and off positions.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number IC694ACC300 is a voltage input simulator, manufactured by GE Fanuc Emerson. Its main application is to simulate operation of discrete modules. This device is part of the RX3i PacSystems series of discrete I/O modules and provides the interface between a PLC and external input device. The PacSystem is a rack-based system, based on PCI standards providing fast and consistent control between its connected modules. The module type is input simulator and it has no backplane restrictions. It occupies one single slot on the backplane and it has 16 points. Depending on the application, the unit has a variable response time of 20 milliseconds for ON and 30 milliseconds for OFF. Its connector type is switches and the internal power used is 120 milliamperes at 5 volts DC. There are LED indicators, which provide status information for ON or OFF position on each toggle switch.
The unit is part of starter kits, provided as a set of equipment ready to use at customer’s site. There are three available starter kits, in which item IC694ACC300 is included. The first kit is the Emerson - GE Fanuc Emerson IC695STK001, which is an RX3i controller package 1 starter kit and includes the RX3i system with software. The next kit configuration, IC695STK002, is the RX3i control and view power package 2 starter kit, which includes a QuickView panel that measures 6 inches with a DC power supply. The third, and most extended kit, is the IC695STK003, known as the complete package with control, motion, and view that includes RX3i, the active motion module, and the 6-inch QuickView panel with software.
Question: Does Automation Stop offer repairs on the IC694ACC300?
Answer: Yes. We offer repairs for the IC694ACC300 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694ACC300?
Answer: If you buy the IC694ACC300 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694ACC300 online?
Answer: Yes. Automation Stop sells the IC694ACC300 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694ACC300?
Answer: The IC694ACC300 is made by Emerson - GE Fanuc.
For additional information about IC694ACC300 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694ACC300.
Revision Part # | Also Known As | Availability |
---|---|---|
IC694ACC300A | IC694ACC300 Series A, Rev A | Request a Quote |
IC694ACC300B | IC694ACC300 Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.