GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC694ALG220 |
| Series: | RX3i PacSystem |
| UPC: | 799705802438 |
Description:
Designed and produced by Emerson - GE Fanuc, product number IC694ALG220 is an analog input module. This module belongs to the RX3i PacSystem series of products. This device has 4 analog input channels. The voltage range of this device is -10 to 10 volts. It has an input impedance rating of greater than 9 Megohms. It also has an input filter response of 17 hertz. This module may be connected to other devices via a terminal block.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Adding Items to Cart
Looking for a IC694ALG220? We can help!
Request a QuoteKey Features:
- has input voltage of -10 to +10 volts
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Designed and manufactured by the company known as Emerson - GE Fanuc, part number IC694CHS398 is an analog input module. This module is a part of the RX3i PacSystem series of products. When it comes to the backplane support of this device, there are no restrictions. When connected to a backplane, the GE Fanuc IC694ALG220 occupies a single slot. This analog input module has a total of four (4) analog input channels. This module does not have HART support. It also does not have a channel-to-channel isolation rating. The voltage range of the GE Fanuc IC694ALG220 analog input module is -10 volts to 10 volts. The update rate of this product is four (4) milliseconds for all of the channels. This product has a 12-bit resolution, or 5 millivolts/20 microamperes/bit. This GE Fanuc device also has an accuracy rating of plus or minus (+/-) 10 millivolts/40 microamperes at 25 degrees Celsius, or 77 degrees Fahrenheit. The input impedance of the GE Fanuc IC694ALG220 is greater than nine (9) Megohms. Additionally, the input filter response of this device is seventeen (17) hertz. The internal power used by this device is twenty-seven (27) milliamperes at five (5) volts DC and ninety-eight (98) milliamperes at twenty-four (24) volts DC isolated. The GE Fanuc IC694ALG220 analog input module is not equipped with a notch filter, nor does it have diagnostics. This module may be connected to other product via a terminal block with twenty (20) screws. This terminal block is included with this GE Fanuc product.
FAQ
Question: Does Automation Stop offer repairs on the IC694ALG220?
Answer: Yes. We offer repairs for the IC694ALG220 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694ALG220?
Answer: If you buy the IC694ALG220 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694ALG220 online?
Answer: Yes. Automation Stop sells the IC694ALG220 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694ALG220?
Answer: The IC694ALG220 is made by Emerson - GE Fanuc.
Series information for IC694ALG220
For additional information about IC694ALG220 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694ALG220.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC694ALG220A | IC694ALG220 Series A, Rev A | Request a Quote |
| IC694ALG220B | IC694ALG220 Series B, Rev B | Request a Quote |
| IC694ALG220C | IC694ALG220 Series C, Rev C | Request a Quote |
Common Misspellings:
- IC694ALG22O
- IC694AL6220
- IC694AL622O
- ICG94ALG220
- ICG94ALG22O
- ICG94AL6220
- ICG94AL622O
- 1C694ALG220
- 1C694ALG22O
- 1C694AL6220
- 1C694AL622O
- 1CG94ALG220
- 1CG94ALG22O
- 1CG94AL6220
- 1CG94AL622O
