GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC694ALG221 |
| Series: | RX3i PacSystem |
| UPC: | 799705802445 |
Description:
The IC694ALG221 is an analog input module. It is designed for use with RX3i PacSystem controllers from GE Fanuc. Part number IC694ALG221 comes with four (4) different current channels. The conversion speed for all of this device's channels is half of a millisecond. For indicating the different operation status, there are several LEDs on the front panel of this input module. When the LED is green, it signifies that the input module is working perfectly. It also features many safety features.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Adding Items to Cart
Looking for a IC694ALG221? We can help!
Request a QuoteKey Features:
- is a analog
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC694ALG221 from GE Fanuc is an analog current input module. This particular module is built for use with the RX3i PacSystem. This input module accepts two different input ranges: 4 to 20 milliamperes (default) and 0 to 20 milliamperes. Two range jumpers are included with this current input module. One of these jumpers is meant for the 1st and the other one for the 2nd channel. The remaining jumper is intended for the 3rd and 4th channels. The input range changes to 0-20 milliamperes when a jumper is attached to the I/O panel. The conversion speed on all four channels is half that of a millisecond, which is faster than most other modules on the market.
The conversion speed of the channels allows for a 2-millisecond update rate. This happens because each jumper has two channels. Each of them has a conversion speed rated at half a millisecond. For operation with a lowered performance at up to 200 volts common-mode, the IC694ALG221's input protection will suffice.
Using optical isolation, the module provides isolation to protect against external noise generated from the field wiring and the backplane. The IC694ALG221 can be inserted in any RX3i system's I/O slot. The module's location aids in determining the power source.
If the terminal is located inside the universal backplane, power must be provided from any external source of power as well as 24 volts direct current. Remote power is spread around using the backplane itself if it is in the remote or the expansion backplane. When the module's OK LED is on, the module's power supply is working.
FAQ
Question: Does Automation Stop offer repairs on the IC694ALG221?
Answer: Yes. We offer repairs for the IC694ALG221 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694ALG221?
Answer: If you buy the IC694ALG221 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694ALG221 online?
Answer: Yes. Automation Stop sells the IC694ALG221 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694ALG221?
Answer: The IC694ALG221 is made by Emerson - GE Fanuc.
Series information for IC694ALG221
For additional information about IC694ALG221 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694ALG221.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC694ALG221A | IC694ALG221 Series A, Rev A | Request a Quote |
| IC694ALG221D | IC694ALG221 Series D, Rev D | Request a Quote |
Common Misspellings:
- IC694ALG22I
- IC694AL6221
- IC694AL622I
- ICG94ALG221
- ICG94ALG22I
- ICG94AL6221
- ICG94AL622I
- 1C694ALG221
- 1C694ALG22I
- 1C694AL6221
- 1C694AL622I
- 1CG94ALG221
- 1CG94ALG22I
- 1CG94AL6221
- 1CG94AL622I
