GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC694ALG391 |
| Series: | RX3i PacSystem |
| UPC: | 799705802407 |
Description:
The GE Fanuc Emerson IC694ALG391 is an analog current output module for RX3i systems. This module provides two output channels. The module offers two programmed output current ranges. The IC694ALG391 weighs approximately 290 grams (0.63 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC694ALG391 is an analog current output module that can be used for RX3i systems. This module provides two output channels with a scan time of 5 milliseconds that can convert a discrete signal of 12 bits to an analog current signal. The module offers two programmed output current ranges: either from 4 milliamperes to 20 milliamperes with a resolution of 4 microamperes or from 0 milliamperes to 20 milliamperes with a resolution of 5 microamperes. This module draws a current of 30 milliamperes at a voltage of +5 volts DC and a current of 215 milliamperes at a voltage of 24 volts DC. The IC694ALG391 has a LED indicator on the front panel to show the power state of this module.
The IC694ALG391 employs optical isolation to provide electrical isolation with the backplane and wires. The module can be easily mounted in an I/O slot of either 5 or 10-slot baseplate. This module generates an internal voltage of +24 volts DC to drive and control the current loop outputs. The output module state can be easily set using the jumper located in the detachable terminal circuit connector. The module offers the possibility to the user or the operator to employ an external power supply to power both the module and the loop current with a voltage range from 20 volts DC to 30 volts DC. The IC694ALG391 weighs approximately 290 grams (0.63 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | PACSystems RX3i |
| Part Number | IC694ALG391 |
| Description | Analog current output module |
| Number of channels | 2 |
| Load requirement | 30 mA from +5 VDC supply / 215 mA from Isolated +24 VDC supply |
| D/A resolution | 12 bits |
| Number of output range | 2 |
| Output current ranges | 4 mA- 20 mA/0 - 20 mA |
| Sign bit | N/A |
| Scan time | 5 ms |
| External supply voltage range | 20 to 30 VDC |
| Resolution 4 to 20 mA / 0 to 20 mA | 4μA / 5 μA |
| User load | 0 to 850 ohms |
| Output load capacitance | 2000 pF |
| Output load inductance | 1 H |
| Weight | 290 g (0.63 lb.) |
FAQ
Question: Does Automation Stop offer repairs on the IC694ALG391?
Answer: Yes. We offer repairs for the IC694ALG391 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694ALG391?
Answer: If you buy the IC694ALG391 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694ALG391 online?
Answer: Yes. Automation Stop sells the IC694ALG391 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694ALG391?
Answer: The IC694ALG391 is made by Emerson - GE Fanuc.
Question: What Brand does the IC694ALG391 have?
Answer: The IC694ALG391 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What is the D/A resolution of the Allen Bradley/Rockwell Automation IC694ALG391?
Answer: The D/A resolution of the IC694ALG391 is 12 bits.
Question: What Description does the IC694ALG391 have?
Answer: The Allen Bradley-Rockwell Automation IC694ALG391 has a Analog current output module Description.
Question: What is the External supply voltage range of the Allen Bradley IC694ALG391?
Answer: The External supply voltage range of the IC694ALG391 is 20 to 30 VDC.
Question: What Load requirement does the IC694ALG391 have?
Answer: The Allen Bradley/Rockwell Automation IC694ALG391 has a Load requirement of 30 mA from +5 VDC supply / 215 mA from Isolated +24 VDC supply.
Question: What is the Number of channels of the IC694ALG391?
Answer: The Number of channels of the IC694ALG391 is 2.
Question: What Number of output range does the IC694ALG391 have?
Answer: The Rockwell Automation IC694ALG391 has a Number of output range of 2.
Question: What is the Output current ranges of the IC694ALG391?
Answer: The Output current ranges of the IC694ALG391 is 4 mA- 20 mA/0 - 20 mA.
Question: What Output load capacitance does the IC694ALG391 have?
Answer: The IC694ALG391 has a Output load capacitance of 2000 pF.
Question: What Output load inductance does the Allen Bradley IC694ALG391 have?
Answer: The Output load inductance of the IC694ALG391 is 1 H.
Question: What part Number does the Allen Bradley-Rockwell Automation IC694ALG391 have?
Answer: The IC694ALG391 has a unit Number of IC694ALG391.
Question: What Resolution 4 to 20 mA / 0 to 20 mA does the Allen Bradley Automation IC694ALG391 have?
Answer: The IC694ALG391 has a Resolution 4 to 20 mA / 0 to 20 mA of 4μA / 5 μA.
Question: What Scan time does the IC694ALG391 have?
Answer: The IC694ALG391 has a Scan time of 5 ms.
Question: What Sign bit is included with the IC694ALG391?
Answer: The IC694ALG391 has a N/A Sign bit.
Question: What User load does the Allen-Bradley IC694ALG391 have?
Answer: The User load of the IC694ALG391 is 0 to 850 ohms.
Question: What is the Weight of the IC694ALG391?
Answer: The Weight of the IC694ALG391 is 290 g (0.63 lb.).
Series information for IC694ALG391
For additional information about IC694ALG391 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694ALG391.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC694ALG391A | IC694ALG391 Series A, Rev A | Request a Quote |
| IC694ALG391C | IC694ALG391 Series C, Rev C | Request a Quote |
Common Misspellings:
- IC694ALG39I
- IC694AL6391
- IC694AL639I
- ICG94ALG391
- ICG94ALG39I
- ICG94AL6391
- ICG94AL639I
- 1C694ALG391
- 1C694ALG39I
- 1C694AL6391
- 1C694AL639I
- 1CG94ALG391
- 1CG94ALG39I
- 1CG94AL6391
- 1CG94AL639I
