GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC694MDL635 |
| Series: | RX3i PacSystem |
| UPC: | 594995012723 |
Description:
The IC694MDL635 Module made by GE Fanuc is an input module for the RX3i PacSystem series. It might be inserted in any slot of I/O on the RX3i system. The module operates at a voltage rating of 125 volts direct current and supports positive or negative logic. This input module features a wide range of input factors, including an off-state voltage of 0 to 30 Volts DC, an on-state voltage of 90 to 150 Volts DC, an on-state response time of 8 milliseconds typical, an off-state response time of 8 milliseconds typical, a 1.41 milliamps of the on-state current, and 0.46 milliamps of the off-state current.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc prepared IC694MDL635 Input Module is part of the GE RX3i PacSystem series. It features a voltage level of 125 Volts DC, an input current of 1.97 milliamperes at the voltage rating, a voltage level range of 0 to 150 Volts DC, and power feeding of 80 milliamperes from the 5 Volts bus power and 31.5 milliamperes from user-supplied power. The module features sixteen input points organized in a single group and a common power input terminal. The module may be configured to operate in either negative or positive logic. This input module features a wide range of input characteristics, including an on-state voltage of 90–150 Volts DC, and 0–30 Volts DC off-state voltage, a 1.41 milliamperes on-state current rating with 0.46 milliamperes off-state current, for both an 8 milliseconds (typical) on-state and off-state response time.
To operate field devices, the GE Fanuc made IC694MDL635 Input Module uses user-supplied power. It features sixteen green LEDs that indicate whether all input points are active or inactive. The LEDs are labeled from one to sixteen. The IC694MDL635 output module operates between 32- and 140-℉ / 0 to 60 ° C. Additionally, it needs a storing temperature range of -40 to 185 ℉ /-40 to 85 ° C and a humidity range of 5 to 95 percentages for non-condensing situations. It holds a vibration resistance rating of 10 to 57 Hertz and a peak displacement peak of 0.0524 millimeters (0.006 inches) under JISC0911 and IEC60068-2-6 standards. Additionally, the module meets the JISC0912 and IEC60068-2-27 requirements for shock resistance of 15 G for 11 milliseconds.
FAQ
Question: Does Automation Stop offer repairs on the IC694MDL635?
Answer: Yes. We offer repairs for the IC694MDL635 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694MDL635?
Answer: If you buy the IC694MDL635 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694MDL635 online?
Answer: Yes. Automation Stop sells the IC694MDL635 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694MDL635?
Answer: The IC694MDL635 is made by Emerson - GE Fanuc.
Series information for IC694MDL635
For additional information about IC694MDL635 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694MDL635.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC694MDL635D | IC694MDL635 Series D, Rev D | Request a Quote |
Common Misspellings:
- IC694MDL63S
- IC694MDLG35
- IC694MDLG3S
- ICG94MDL635
- ICG94MDL63S
- ICG94MDLG35
- ICG94MDLG3S
- 1C694MDL635
- 1C694MDL63S
- 1C694MDLG35
- 1C694MDLG3S
- 1CG94MDL635
- 1CG94MDL63S
- 1CG94MDLG35
- 1CG94MDLG3S
