GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC694MDL732 |
Series: | RX3i PacSystem |
UPC: | 1669127951110 |
Description:
Part number IC694MDL732 is a positive logic output module that was designed and manufactured by Emerson - GE Fanuc. This module has eight (8) outputs that are all grouped together. This module has a rated voltage of 12/24 volts DC, with the output voltage range being 12 to 24 volts DC. This device has a maximum output current of 0.5 amperes per point and 2 amperes per common. This device has a power consumption rating of 50 milliamperes from a 5-volt bus on the backplane.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Designed and manufactured by Emerson - GE Fanuc, part number IC694MDL732 is a positive logic output module. This module has eight (8) outputs are all grouped together. In order for this output device to function properly, it must be linked to both the negative buses and the component output. The RX3i PacSystem universal backplane makes it easy to insert the IC694MDL732 positive logic output module into a rack. It can be equipped in any slot on a rack, and it may be used without any issues or mistakes. Users must get the power to run the field devices from somewhere else. This module is equipped with eight (8) LEDs, or light emitting diodes, that show the state of each output. In the best case, the module can turn itself on and off in 2 milliseconds. This positive logic output module has a blue label on the front of it that indicates that it is a low-voltage module. Emerson - GE Fanuc's IC694MDL732 positive logic output module has a voltage output ranging from 12 to 24 volts DC (direct current). This module has a rated voltage of 250 volts AC (alternating current) when operated continuously, or a rated voltage of 1500 volts AC (alternating current) when operated for sixty (60) seconds. Additionally, this module has a maximum rated output current of 0.5 amperes per point, as well as a maximum rated output current of two (2) amperes per common. In rated inrush current of the IC694MDL732 positive logic output module is rated at 4.78 amperes for ten (10) milliseconds. The power consumption rating of this device is 50 milliamperes, with all outputs on, from a 5-volt bus on the backplane.
Question: Does Automation Stop offer repairs on the IC694MDL732?
Answer: Yes. We offer repairs for the IC694MDL732 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694MDL732?
Answer: If you buy the IC694MDL732 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694MDL732 online?
Answer: Yes. Automation Stop sells the IC694MDL732 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694MDL732?
Answer: The IC694MDL732 is made by Emerson - GE Fanuc.
Question: What amperage does the Emerson - GE Fanuc IC694MDL732 have?
Answer: The Emerson - GE Fanuc IC694MDL732 includes a amperage of 0.5.
For additional information about IC694MDL732 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694MDL732.
Revision Part # | Also Known As | Availability |
---|---|---|
IC694MDL732A | IC694MDL732 Series A, Rev A | Request a Quote |
IC694MDL732C | IC694MDL732 Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.