GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC694MDL740

✓ In Stock

IC694MDL740 Image 1 thumbnail
IC694MDL740 Image 2 thumbnail
IC694MDL740 Image 3 thumbnail
IC694MDL740 Image 4 thumbnail
IC694MDL740 Image 5 thumbnail
IC694MDL740 Image 6 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC694MDL740
Series: RX3i PacSystem
UPC: 117007557731

Description:

The IC694MDL740 is a 12/24 Volts DC, 16-Point Positive Logic Output Module manufactured by GE Fanuc Automation. This output module is a member of the GE Fanuc RX3i PACSystem series and provides 16 output points divided into two different groups.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The IC694MDL740 is a 16-Point Output Module manufactured by GE Fanuc Automation as a member of GE Fanuc RX3i PACSystems Series of modules. This 12/24 Volt DC Positive Logic Output Module can be connected to the RX3i PACSystems Programmable Logic Controller (PLC) systems. The IC694MDL740 Output Module has 16 output points that are arranged into two (2) groups, each containing eight (8) output points each. Each module has a separate LED indicator that turns on when the corresponding output point is powered on. The IC694MDL740 is a positive logic output module that only requires a voltage of 5 Volts DC. When the module is installed in the RX3i PACSystems programmable logic controller, the module draws the power required for its operation from the backplane where it is installed. The module requires only 5 Volts DC from the backplane bus for operations and draws 110 milliamperes of current from the backplane.

The IC694MDL740 Positive Logic Output Module is a low voltage module. It has a blue label indicating it as a low voltage module. The IC694MDL740 output module should only be used with low voltage devices as high voltage devices can cause damage to the module or devices, or the module will be unable to communicate or function with high voltage devices. The operating voltage range of the IC694MDL740 output module is from 12 Volts to 24 Volts DC. The isolation voltage rating of the module is 250 Volts AC for continuous isolation. However, this isolation voltage can reach up to 1500 Volts AC for one minute. The module can be mounted on any I/O slot in the rack within the RX3i PLC.

Technical Specifications

Number of Outputs 16 ( 2 groups of 8)
Output Current 0.5 Amperes per point
Power Consumption 110 milliamperes from 5 Volt Bus
Rated Voltage 12/24 Volts DC
Output per Module 16 (two of eight outputs each)
Inrush Current 4.78 Amperes for 10 milliseconds
Off-State Leakage 1 milliamperes, maximum
Output Voltage Drop 1 Volt, maximum
On Response Time 2 milliseconds, maximum
Output Voltage Range 12 to 24 Volts DC (+20%, -15%)
Group to Group 250 Volts AC continuous; 1500 Volts AC for 1 minute
Off Response Time 2 milliseconds, maximum
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC694MDL740?

Answer: Yes. We offer repairs for the IC694MDL740 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC694MDL740?

Answer: If you buy the IC694MDL740 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC694MDL740 online?

Answer: Yes. Automation Stop sells the IC694MDL740 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC694MDL740?

Answer: The IC694MDL740 is made by Emerson - GE Fanuc.


Question: What Group to Group does the IC694MDL740 have?

Answer: The Rockwell Automation IC694MDL740 has a Group to Group of 250 Volts AC (alternating current) continuous; 1500 Volts AC (alternating current) for 1 minute.


Question: What Inrush Current does the Rockwell-Automation IC694MDL740 have?

Answer: The Inrush Current of the Rockwell-Automation IC694MDL740 is 4.78 Amperes for 10 milliseconds.


Question: What is the Number of Outputs of the IC694MDL740?

Answer: The IC694MDL740 has a Number of Outputs of 16 ( 2 groups of 8).


Question: What Off Response Time does the Rockwell Automation IC694MDL740 have?

Answer: The IC694MDL740 has a Off Response Time of 2 milliseconds, maximum.


Question: What Off-State Leakage does the Allen-Bradley IC694MDL740 have?

Answer: The Allen-Bradley IC694MDL740 has a Off-State Leakage of 1 milliamperes, maximum.


Question: What On Response Time does the IC694MDL740 have?

Answer: The On Response Time of the Allen Bradley/Rockwell Automation IC694MDL740 is 2 milliseconds, maximum.


Question: What is the Output Current of the IC694MDL740?

Answer: The Output Current of the Rockwell-Automation IC694MDL740 is 0.5 Amperes per point.


Question: What Output per Module does the IC694MDL740 have?

Answer: The Output per Module of the IC694MDL740 is 16 (two of eight outputs each).


Question: What Output Voltage Drop does the IC694MDL740 have?

Answer: The Allen-Bradley IC694MDL740 has a Output Voltage Drop of 1 Volt, maximum.


Question: What is the Output Voltage Range of the Rockwell-Automation IC694MDL740?

Answer: The Rockwell-Automation IC694MDL740 has a Output Voltage Range of 12 to 24 Volts direct current (DC) (+20%, -15%).


Question: What is the Power Consumption of the IC694MDL740?

Answer: The Power Consumption of the IC694MDL740 is 110 milliamperes from 5 Volt Bus.


Question: What Rated Voltage does the IC694MDL740 have?

Answer: The IC694MDL740 has a Rated Voltage of 12/24 Volts direct current.


Series information for IC694MDL740

For additional information about IC694MDL740 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694MDL740.

Revision Part # Also Known As Availability
IC694MDL740A IC694MDL740 Series A, Rev A Request a Quote
IC694MDL740C IC694MDL740 Series C, Rev C Request a Quote

Common Misspellings:

  • IC694MDL74O
  • ICG94MDL740
  • ICG94MDL74O
  • 1C694MDL740
  • 1C694MDL74O
  • 1CG94MDL740
  • 1CG94MDL74O

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP