GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC694MDL742 |
| Series: | RX3i PacSystem |
| UPC: | 176433594468 |
Description:
IC694MDL742 is a 16 point 12 or 24 Volt DC and 1 Ampere Electronic Short Circuit Protection (ESCP) output module manufactured by GE Fanuc for the RX3i series. This output module provides 16 output pins in groups of 8.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Adding Items to Cart
Looking for a IC694MDL742? We can help!
Request a QuoteKey Features:
- is a output module type
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 12/24 Volts DC 1 Ampere Positive logic ESCP output module provides 16 output pins in 2 groups. Both the groups, with 8 pins each, have a common power output terminal. The module has a characteristic of Positive Logic: it sources the current from the positive power or user common bus to the loads. The output devices are connected between the output terminals and the negative power bus. The output characteristics of the module are compatible with several different load devices including solenoids, indicators, and motor starters. For operating the field devices, power needs to be supplied by the user. For each output point, the individual LEDs show the on or off status. IC694MDL742 module doesn’t contain any fuse for protection. The red LED indicator in the module indicates Electronic Short Circuit Protection (ESCP) trips. The blue band on the label of the module shows that it is a low voltage module. It can be installed in any I/O slot of the RX3i system.
The module IC694MDL742 has two ESCP circuits. The first ESCP circuit can protect 1-8 output points while the other circuit protects 9 to 16 output points. IC694MDL742 monitors the common signal from both the groups electronically. If there is a short circuit, the module turns off the output points of its group and turns the red LED on. The output point LEDs don’t get turned off. The electronic Short Circuit Protection module doesn’t prevent individual outputs from increasing beyond their ratings, but it can protect the module during a short-circuited load. ESCP is reset by providing 12/24 Volts DC user power to the module.
Technical Specifications
| Series | RX3i |
| Output Voltage Range | 12 to 24 Volts DC |
| Power Consumption | 130 milliampere |
| Inrush Current | 5.2 Amps for 10 milliseconds |
| Rated Voltage | 12/24 Volts DC |
| Response Time | 2 milliseconds maximum |
| Output Current | 1 Ampere maximum per point |
| Output Voltage Drop | 1.2 volts maximum |
| Off-state Leakage | 1 milliampere maximum |
| Group to Group | 250 Volts AC continuous |
| Outputs per Module | 16 |
| Media Connector | 2x RJ45 + 2x SFP |
| Current Consumption | 34 x 145 x 140 mm |
FAQ
Question: Does Automation Stop offer repairs on the IC694MDL742?
Answer: Yes. We offer repairs for the IC694MDL742 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694MDL742?
Answer: If you buy the IC694MDL742 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694MDL742 online?
Answer: Yes. Automation Stop sells the IC694MDL742 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694MDL742?
Answer: The IC694MDL742 is made by Emerson - GE Fanuc.
Question: What is the Current Consumption of the Allen Bradley/Rockwell Automation IC694MDL742?
Answer: The Current Consumption of the Allen Bradley/Rockwell Automation IC694MDL742 is 34 x 145 x 140 mm.
Question: What is the Group to Group of the IC694MDL742?
Answer: The IC694MDL742 has a Group to Group of 250 Volts alternating current (AC) continuous.
Question: What Inrush Current does the Allen Bradley-Rockwell Automation IC694MDL742 have?
Answer: The Inrush Current of the IC694MDL742 is 5.2 amperes for 10 milliseconds.
Question: What is the Media Connector of the Allen Bradley/Rockwell Automation IC694MDL742?
Answer: The Media Connector of the IC694MDL742 is 2x RJ45 + 2x small form-factor pluggable transceiver (SFP).
Question: What is the Off-state Leakage of the IC694MDL742?
Answer: The IC694MDL742 has a Off-state Leakage of 1 milliampere maximum.
Question: What Output Current does the IC694MDL742 have?
Answer: The Output Current of the Allen Bradley-Rockwell Automation IC694MDL742 is 1 Ampere maximum per point.
Question: What is the Output Voltage Drop of the IC694MDL742?
Answer: The Output Voltage Drop of the Allen-Bradley IC694MDL742 is 1.2 volts maximum.
Question: What is the Output Voltage Range of the IC694MDL742?
Answer: The Output Voltage Range of the IC694MDL742 is 12 to 24 Volts direct current (DC).
Question: What is the Outputs per Module of the Allen Bradley/Rockwell Automation IC694MDL742?
Answer: The Outputs per Module of the IC694MDL742 is 16.
Question: What Power Consumption does the IC694MDL742 have?
Answer: The Power Consumption of the Rockwell Automation IC694MDL742 is 130 milliampere.
Question: What Rated Voltage does the IC694MDL742 have?
Answer: The Allen-Bradley IC694MDL742 has a Rated Voltage of 12/24 Volts DC (direct current).
Question: What Response Time does the IC694MDL742 have?
Answer: The Response Time of the Rockwell-Automation IC694MDL742 is 2 milliseconds maximum.
Series information for IC694MDL742
For additional information about IC694MDL742 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694MDL742.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC694MDL742A | IC694MDL742 Series A, Rev A | Request a Quote |
| IC694MDL742B | IC694MDL742 Series B, Rev B | Request a Quote |
| IC694MDL742C | IC694MDL742 Series C, Rev C | Request a Quote |
| IC694MDL742D | IC694MDL742 Series D, Rev D | Request a Quote |
Common Misspellings:
- ICG94MDL742
- 1C694MDL742
- 1CG94MDL742
