GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC694MDL916

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC694MDL916
Series: RX3i PacSystem
UPC: 773055780998

Description:

The IC694MDL916 is an RX3i PAC System series output module that has sixteen (16) output channels. The module is manufactured by GE Fanuc and is a relay output module that supports point-to-point isolation.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The IC694MDL916 is an RX3i PAC systems series output module manufactured by GE Fanuc Automation. This relay output module has sixteen (16) output channels and supports point-to-point isolation. The switching current rating of the module is 4 Amperes and the maximum backplane current rating is 300 milliamperes. The relay output module can be installed in any slot designated for the I/O module in PLC. The IC694MDL916 output module is designed to be installed in an RX3i PAC systems Programmable Logic Controller allowing PLCs to communicate with external devices. This module can be installed on any slot designated for I/O modules in the rack. The IC694MDL916 module can be configured either with the Service Pack 2 or later versions of Service Pack software or with the Proficy Software’s machine Edition version.
The IC694MDL916 relay output module uses an external power supply for its operations. The module requires a supply voltage rating of zero (0) to 125 Volts DC or zero (0) to 250 Volts AC. The supported output voltage ranges of the module are zero (0) to 125 Volts DC or 5 to 250 Volts AC with frequency for both the voltage ranges between 47 to 63 Hertz. The response time of the relay output module is around 10 milliseconds between when the module is switched off and when it is switched on. The IC694MDL916 needs to be mounted on the terminal block that will host all the wiring of the module. The module is compatible with different types of terminal blocks including box-style terminal blocks, standard spring terminal blocks, and extended spring and box type terminal blocks.

Technical Specifications

Number of Outputs 16
Frequency 50/60 Hertz
Output Current 10 milliamperes per point, maximum
Power Consumption 300 milliamperes from 5 Volts bus, 150 milliamperes from 24 Volts relay
Rated Voltage 5/24/125 Volts DC , 120/240 Volts AC
Output Voltage Drop 0.3 Volts DC
Switching Frequency 20 cycles per minute, maximum
External Power Supply 0-125 Volts DC
Field to Backplane and to Frame Ground, Group to Group 250 Volts AC continuous; 1500 Volts AC for 1 minute
Response Time (On/Off) 10 milliseconds, maximum
Current Consumption 34 x 145 x 140 millimeters
Media Connector 2 x RJ 45 + 2 x SFP
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC694MDL916?

Answer: Yes. We offer repairs for the IC694MDL916 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC694MDL916?

Answer: If you buy the IC694MDL916 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC694MDL916 online?

Answer: Yes. Automation Stop sells the IC694MDL916 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC694MDL916?

Answer: The IC694MDL916 is made by Emerson - GE Fanuc.


Question: What is the Current Consumption of the IC694MDL916?

Answer: The Current Consumption of the Rockwell Automation IC694MDL916 is 34 x 145 x 140 millimeters.


Question: What External power supply does the IC694MDL916 have?

Answer: The Allen Bradley/Rockwell Automation IC694MDL916 has a External power supply unit of 0-125 Volts direct current (DC).


Question: What Field to Backplane and to Frame Ground, Group to Group does the Allen Bradley/Rockwell Automation IC694MDL916 have?

Answer: The Field to Backplane and to Frame Ground, Group to Group of the Allen Bradley/Rockwell Automation IC694MDL916 is 250 Volts AC (alternating current) continuous; 1500 Volts AC (alternating current) for 1 minute.


Question: What Frequency does the IC694MDL916 have?

Answer: The IC694MDL916 has a Frequency of 50/60 Hertz.


Question: What is the Media Connector of the IC694MDL916?

Answer: The Allen Bradley Automation IC694MDL916 has a Media Connector of 2 x RJ 45 + 2 x small form-factor pluggable transceiver (SFP).


Question: What is the Number of Outputs of the IC694MDL916?

Answer: The IC694MDL916 has a Number of Outputs of 16.


Question: What is the Output Current of the Rockwell-Automation IC694MDL916?

Answer: The Output Current of the IC694MDL916 is 10 milliamperes per point, maximum.


Question: What Output Voltage Drop does the IC694MDL916 have?

Answer: The Output Voltage Drop of the IC694MDL916 is 0.3 Volts direct current.


Question: What Power Consumption does the Allen Bradley/Rockwell Automation IC694MDL916 have?

Answer: The Allen Bradley/Rockwell Automation IC694MDL916 has a Power Consumption of 300 milliamperes from 5 Volts bus, 150 milliamperes from 24 Volts relay.


Question: What is the Rated Voltage of the Allen Bradley/Rockwell Automation IC694MDL916?

Answer: The Rated Voltage of the IC694MDL916 is 5/24/125 Volts direct current (DC) , 120/240 Volts AC (alternating current).


Question: What is the Response Time (On/Off) of the IC694MDL916?

Answer: The IC694MDL916 has a Response Time (On/Off) of 10 milliseconds, maximum.


Question: What Switching Frequency does the IC694MDL916 have?

Answer: The Allen Bradley-Rockwell Automation IC694MDL916 has a Switching Frequency of 20 cycles per minute, maximum.


Series information for IC694MDL916

For additional information about IC694MDL916 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694MDL916.

Revision Part # Also Known As Availability
IC694MDL916-AA IC694MDL916 Series AA, Rev AA Request a Quote
IC694MDL916-CA IC694MDL916 Series CA, Rev CA Request a Quote

Common Misspellings:

  • IC694MDL91G
  • IC694MDL9I6
  • IC694MDL9IG
  • ICG94MDL916
  • ICG94MDL91G
  • ICG94MDL9I6
  • ICG94MDL9IG
  • 1C694MDL916
  • 1C694MDL91G
  • 1C694MDL9I6
  • 1C694MDL9IG
  • 1CG94MDL916
  • 1CG94MDL91G
  • 1CG94MDL9I6
  • 1CG94MDL9IG

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP