GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC694MDL930 |
| Series: | RX3i PacSystem |
| UPC: | 424205512487 |
Description:
The IC694MDL930 is an 8-Point Isolated Relay Output module manufactured by GE Fanuc. This Isolated Relay Output Module is from the GE Fanuc RX3i Series and provides eight (8) normally open relay circuits to control output loads.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC694MDL930 is an 8-Point AC/DC Output Module designed as a part of the RX3i PACSystems Series. The 8-Channel Isolated Relay Output Module is manufactured by GE Fanuc Automation as a part of the RX3i PACSystems discrete I/O PLC product line. The Output module is envisioned to provide the interface between external output devices like solenoids, indicators, motor starters, and RX3i series PLCs. It provides eight (8) individually isolated and normally open outputs. Each output can be used for switching loads of a maximum of 4 Amperes with each output point equipped with a distinct common output terminal. The IC694MDL930 output module uses an external power supply for operation. The users can use the module with an AC or DC power module with a power rating of 120 to 240 Volts AC or 24 Volts DC for powering the field devices.
The IC694MDL930 output module operates on a voltage ranging from 5 to 250 Volts DC at a frequency of 50 to 60 Hertz. The point-to-point output isolation of the module is 250 Volts AC continuous or 1500 Volts AC for 60 seconds. The module also features eight (8) individually isolated normally open relay outputs with an output current load of 4 Amperes per output point and 20 Amperes per module. This module comes with 6 milliamperes of maximum backplane current at 5 Volts DC. The minimum output load per point of the module is 10 milliamperes. It has a maximum of 5 Amperes of inrush current rating and the response time of the module for switching on and off is 10 milliseconds.
Technical Specifications
| Number of Outputs | 8 (isolated) |
| Frequency | 50/60 Hertz |
| Output Current | 2 Amperes per point, 4 Amperes resistive maximum |
| Rated Voltage | 24 Volts DC, 120/240 Volts AC |
| Operating Voltage | 5 to 30 Volts DC |
| Output per Module | Eight (8) Isolated Outputs |
| Maximum Load | 4 Amperes resistive maximum per output |
| Point to Point | 250 Volts AC continuous; 1500 Volts AC for 1 minute |
| Minimum Load | 10 milliamperes |
| Maximum Inrush | 5 Amperes |
| Power Consumption | 6 milliamperes from 5 Volts bus on backplane |
| On Response Time | 15 milliseconds, maximum |
| Off Response Time | 15 milliseconds, maximum |
FAQ
Question: Does Automation Stop offer repairs on the IC694MDL930?
Answer: Yes. We offer repairs for the IC694MDL930 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694MDL930?
Answer: If you buy the IC694MDL930 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694MDL930 online?
Answer: Yes. Automation Stop sells the IC694MDL930 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694MDL930?
Answer: The IC694MDL930 is made by Emerson - GE Fanuc.
Question: What is the Frequency of the IC694MDL930?
Answer: The Frequency of the Rockwell Automation IC694MDL930 is 50/60 Hertz.
Question: What is the Maximum Inrush of the IC694MDL930?
Answer: The Allen-Bradley IC694MDL930 has a Maximum Inrush of 5 Amperes.
Question: What Maximum Load does the IC694MDL930 have?
Answer: The IC694MDL930 has a Maximum Load of 4 Amperes resistive maximum per output.
Question: What is the Minimum Load of the IC694MDL930?
Answer: The IC694MDL930 has a Minimum Load of 10 milliamperes.
Question: What Number of Outputs does the Rockwell Automation IC694MDL930 have?
Answer: The IC694MDL930 has a Number of Outputs of 8 (isolated).
Question: What is the Off Response Time of the IC694MDL930?
Answer: The Off Response Time of the IC694MDL930 is 15 milliseconds, maximum.
Question: What is the On Response Time of the IC694MDL930?
Answer: The On Response Time of the IC694MDL930 is 15 milliseconds, maximum.
Question: What is the Operating Voltage of the IC694MDL930?
Answer: The IC694MDL930 has a Operating Voltage of 5 to 30 Volts DC.
Question: What Output Current does the Rockwell-Automation IC694MDL930 have?
Answer: The Rockwell-Automation IC694MDL930 has a Output Current of 2 Amperes per point, 4 Amperes resistive maximum.
Question: What Output per Module does the IC694MDL930 have?
Answer: The Rockwell-Automation IC694MDL930 has a Output per Module of Eight (8) Isolated Outputs.
Question: What Point to Point does the IC694MDL930 have?
Answer: The Point to Point of the Rockwell-Automation IC694MDL930 is 250 Volts AC (alternating current) continuous; 1500 Volts AC (alternating current) for 1 minute.
Question: What Power Consumption does the Allen Bradley/Rockwell Automation IC694MDL930 have?
Answer: The IC694MDL930 has a Power Consumption of 6 milliamperes from 5 Volts bus on backplane.
Question: What is the Rated Voltage of the IC694MDL930?
Answer: The IC694MDL930 has a Rated Voltage of 24 Volts DC (direct current), 120/240 Volts alternating current (AC).
Series information for IC694MDL930
For additional information about IC694MDL930 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694MDL930.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC694MDL930A | IC694MDL930 Series A, Rev A | Request a Quote |
| IC694MDL930C | IC694MDL930 Series C, Rev C | Request a Quote |
| IC694MDL930D | IC694MDL930 Series D, Rev D | Request a Quote |
Common Misspellings:
- IC694MDL93O
- ICG94MDL930
- ICG94MDL93O
- 1C694MDL930
- 1C694MDL93O
- 1CG94MDL930
- 1CG94MDL93O
