GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC694PWR331 |
Series: | RX3i PacSystem |
UPC: | 314041441747 |
Description:
Part number IC694PWR331 is a power supply module that was designed and manufactured by GE Fanuc. This module belongs to the RX3i PacSystem series of products. This device has a nominal rated input of 24 volts DC. The input power of this product is rated at 50 watts maximum at full load. It also has a maximum inrush current rated at 4 amperes peak for 100 milliseconds. The isolation rating of the IC694PWR331 is 1500 volts AC for one (1) minute.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Catalog number IC694PWR331 is a power supply module that was designed and produced by the company known as GE Fanuc. This device was engineered to be used for the RX3i PacSystem product series, especially for programmable logic controllers, or PLCs. In addition to that, this power supply module is a serial expansion module that is compatible with all RX3i PacSystem series processors, also known as CPUs. Additionally, it is used in the PLC's sequential expansion backplane after the backplane's power has been withdrawn. The current rating of the IC694PWR331 high-capacity power supply module is 5 amperes. Users should note that the GMC-5-R and the 44A724627-114 are among the fuses that can be used to protect this device. Operators must ensure that the expansion backplane's rack number selection DIP switch is calibrated before inserting this high-capacity power supply.
The GE Fanuc IC694PWR331 power supply module has an input voltage rated at 24 volts direct current (DC), with a maximum input power of 30 watts at full load. The current rating of this module is 5 amperes. The maximum inrush current of this module is 4 amperes peak for 100 milliseconds. The maximum output power of this GE Fanuc product is 30 watts at 5 volts DC, 15 watts at 24 volts DC relay, and 20 watts at 24 volts DC isolated. Additionally, the isolation rating for this device, from the input to the backplane, is rated at 1500 volts AC for one (1) minute. Part number IC694PWR331 has a ride-through time of 10 milliseconds minimum.
Question: Does Automation Stop offer repairs on the IC694PWR331?
Answer: Yes. We offer repairs for the IC694PWR331 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694PWR331?
Answer: If you buy the IC694PWR331 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694PWR331 online?
Answer: Yes. Automation Stop sells the IC694PWR331 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694PWR331?
Answer: The IC694PWR331 is made by Emerson - GE Fanuc.
For additional information about IC694PWR331 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694PWR331.
Revision Part # | Also Known As | Availability |
---|---|---|
IC694PWR331E | IC694PWR331 Series E, Rev E | Request a Quote |
IC694PWR331F | IC694PWR331 Series F, Rev F | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.