GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC695ALG704

✓ In Stock

IC695ALG704 Image 1 thumbnail
IC695ALG704 Image 2 thumbnail
IC695ALG704 Image 3 thumbnail
IC695ALG704 Image 4 thumbnail
IC695ALG704 Image 5 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC695ALG704
Series: RX3i PacSystem
UPC: 704430514624

Description:

The GE Fanuc Emerson IC695ALG704 is an analog voltage/current output module that can be employed for the Rx3i PacSystem. This module provides four (4) non-isolated output channels. The IC695ALG704 outputs can be programmed for either current or voltage output ranges. The IC695ALG704 weighs approximately 230 grams (0.5 pounds) while shipping.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$651.00

Available: 2

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$521.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a IC695ALG704? We can help!

Request a Quote

Key Features:

  • is a analog output
  • comes with 0-20 ma, 4-20 ma of current range

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC695ALG704 is an analog voltage/current output module that used for the Rx3i PacSystem. This module provides four (4) non-isolated output channels which can be enabled or disabled individually. The IC695ALG704 offers fast channel acquisition time of 8 milliseconds. The IC695ALG704 outputs can be programmed for either voltage or current output ranges: from 4 milliamperes to 20 milliamperes with a resolution of 15.6 bits, from 0 milliamperes to 20 milliamperes with a resolution of 15.9 bits, from zero (0) Volts DC to 10 Volts DC with a resolution of 14.9 bits, or from -10 Volts DC to 10 Volts DC with a resolution of 15.9 bits. This module draws a current of 375 milliamperes at a voltage of 3.3 Volts DC. The IC695ALG704 has three (3) LED indicators which are located on the faceplate to show the power and field status of this module.

The IC695ALG704 supports either 32-bit or 16-bit integer data output that can be set as floating-point IEEE. The IC695ALG704 has a red/green LED indicator labelled “TB” that indicates the state of the terminal block. The IC695ALG704 supports a spring, box, extended spring, or extended box style front terminal block. The IC695ALG704 can be easily mounted in an RX3i universal backplane. This module provides diagnostics features and offers the possibility to the user to employ an external isolated power supply with a voltage of 24 Volts DC. The IC695ALG704 weighs approximately 230 grams (0.5 pounds) while shipping and operates at zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series 4 channels, non-isolated voltage/current analogue output module for Rx3i PacSystem
Part Number IC695ALG704
Number of Channels 4
Load Requirement 375 mA @ +3.3VDC, 160 mA @ +24VDC Isolated
Isolation, Field to Backplane 2550 VDC for one second
Output Settling Time Voltage or current output: 2ms, 0 to 95%
Output Current Ranges 0 to 20mA, 4 to 20mA
Output Voltage Ranges +/- 10V, 0 to 10V
Power Dissipation within Module 4.8 Watts, maximum
External Power Supply Voltage Range: 19.2V to 30V (24V nominal) / Current: 150mA maximum
Resolution +/-10V: 15.9 bits, 0 to 10V: 14.9 bits, 0 to 20mA: 15.9 bits, 4 to 20mA : 15.6 bits
Analog Update Rate 8 milliseconds
Output Overvoltage Protection Current outputs only: -30V for 60 seconds, +30V for one hour
Maximum Output Load Current: 850 Ohms maximum / Voltage: 2 Kohms minimum
Weight 230 g (0.5 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC695ALG704?

Answer: Yes. We offer repairs for the IC695ALG704 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC695ALG704?

Answer: If you buy the IC695ALG704 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC695ALG704 online?

Answer: Yes. Automation Stop sells the IC695ALG704 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC695ALG704?

Answer: The IC695ALG704 is made by Emerson - GE Fanuc.


Question: What is the Analog Update Rate of the IC695ALG704?

Answer: The Allen Bradley/Rockwell Automation IC695ALG704 has a Analog Update Rate of 8 milliseconds.


Question: What Brand does the Rockwell-Automation IC695ALG704 have?

Answer: The Rockwell-Automation IC695ALG704 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What is the External power supply of the IC695ALG704?

Answer: The External power supply component of the IC695ALG704 is Voltage Range: 19.2 volts to 2 volts (2 volts nominal) / Current: 150mA maximum.


Question: What Isolation, Field to Backplane does the Allen-Bradley IC695ALG704 have?

Answer: The Isolation, Field to Backplane of the Allen-Bradley IC695ALG704 is 2550 VDC for one second.


Question: What is the Load Requirement of the Allen Bradley/Rockwell Automation IC695ALG704?

Answer: The Allen Bradley/Rockwell Automation IC695ALG704 has a Load Requirement of 375 mA @ +3.3VDC, 160 mA @ +24VDC Isolated.


Question: What is the Maximum Output Load of the IC695ALG704?

Answer: The IC695ALG704 has a Maximum Output Load of Current: 850 Ohms maximum / Voltage: 2 Kohms minimum.


Question: What is the Number of Channels of the IC695ALG704?

Answer: The Allen Bradley IC695ALG704 has a Number of Channels of 4.


Question: What is the Output Current Ranges of the IC695ALG704?

Answer: The IC695ALG704 has a Output Current Ranges of 0 to 20mA, 4 to 20mA.


Question: What Output Overvoltage Protection does the IC695ALG704 have?

Answer: The Allen Bradley Automation IC695ALG704 has a Output Overvoltage Protection of Current outputs only: -30 volts for 60 seconds, +30 volts for one hour.


Question: What is the Output Settling Time of the IC695ALG704?

Answer: The Rockwell Automation IC695ALG704 has a Output Settling Time of Voltage or current output: 2ms, 0 to 95%.


Question: What Output Voltage Ranges does the Rockwell-Automation IC695ALG704 have?

Answer: The Output Voltage Ranges of the IC695ALG704 is +/- 10 volts 0 to 10V.


Question: What is the part Number of the IC695ALG704?

Answer: The Rockwell Automation IC695ALG704 has a component Number of IC695ALG704.


Question: What is the Power Dissipation within Module of the Allen Bradley-Rockwell Automation IC695ALG704?

Answer: The Allen Bradley-Rockwell Automation IC695ALG704 has a Power Dissipation within Module of 4.8 Watts, maximum.


Question: What is the Resolution of the IC695ALG704?

Answer: The Resolution of the Rockwell-Automation IC695ALG704 is +/-10 volts 15.9 bits, 0 to 10 volts 14.9 bits, 0 to 20mA: 15.9 bits, 4 to 20mA : 15.6 bits.


Question: What is the Weight of the Rockwell-Automation IC695ALG704?

Answer: The Weight of the IC695ALG704 is 230 g (0.5 lb) .


Series information for IC695ALG704

For additional information about IC695ALG704 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC695ALG704.

Revision Part # Also Known As Availability
IC695ALG704-AA IC695ALG704 Series AA, Rev AA Request a Quote
IC695ALG704-CB IC695ALG704 Series CB, Rev CB Request a Quote
IC695ALG704-EC IC695ALG704 Series EC, Rev EC Request a Quote

Common Misspellings:

  • IC695ALG7O4
  • IC695AL6704
  • IC695AL67O4
  • IC69SALG704
  • IC69SALG7O4
  • IC69SAL6704
  • IC69SAL67O4
  • ICG95ALG704
  • ICG95ALG7O4
  • ICG95AL6704
  • ICG95AL67O4
  • ICG9SALG704
  • ICG9SALG7O4
  • ICG9SAL6704
  • ICG9SAL67O4
  • 1C695ALG704
  • 1C695ALG7O4
  • 1C695AL6704
  • 1C695AL67O4
  • 1C69SALG704
  • 1C69SALG7O4
  • 1C69SAL6704
  • 1C69SAL67O4
  • 1CG95ALG704
  • 1CG95ALG7O4
  • 1CG95AL6704
  • 1CG95AL67O4
  • 1CG9SALG704
  • 1CG9SALG7O4
  • 1CG9SAL6704
  • 1CG9SAL67O4

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP