GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC695CEP001 |
Series: | RX3i PacSystem |
Description:
The IC695CEP001 CEP is a carrier component. It is manufactured GE Fanuc. 19.2 to 30 volts direct current (DC) is the rated voltage to be used with this carrier component. At twenty-four (24) volts direct current, the estimated power rating is 5.25 watts, or the equivalent of 0.22 amps. It comes equipped with Micro-B USB port for firmware. This carrier component is equipped with two (2) embedded Ethernet RJ-45 ports.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc IC695CEP001 is a type of CEP GE Fanuc CEP carrier module. This device is generally used with, and even designed to be used with, the GE RX3i system. It is ideal for the use of PROFINET communication. For communication purposes, it comes with a copper RJ-45 Ethernet interface. Furthermore, it comes with two (2) Ethernet port connectors. These connector ports come equipped with 10/100 Base-TX receptacles. Being an advanced system component, it has many options, such as full programming and configuration options. Furthermore, this product comes with support for several network topologies. The GE Fanuc IC695CEP001 comes with a USB port for all the necessary firmware upgrades. It comes equipped for improved fault handling. Additionally, this device has options for advanced remote node module scanning. Nineteen point two to thirty (19.2 to 30) volts direct current, or DC, is the optimal operating voltage rating for this carrier module. At a nominal voltage of twenty-four (24) volts direct current, this product can generate a power output of 5.25 watts, or the equivalent of 0.22 amps. The GE Fanuc IC695CEP001 comes with support for 1024 bytes of I/O data per station. Users can connect only one I/O module per station.
The GE Fanuc IC695CEP001 CEP carrier module has dimensions measuring 177.2 millimeters x 51 millimeters x 35 millimeters, or the equivalent dimensions of 7 inches x 2 inches x 1.3 inches. The optimal operating temperature for this module is zero to sixty (0 to 60) degrees Celsius, or converted to degrees Fahrenheit, 32 to 140 °F. Each station on this module can support 512 bytes of I/O data.
Question: Does Automation Stop offer repairs on the IC695CEP001?
Answer: Yes. We offer repairs for the IC695CEP001 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC695CEP001?
Answer: If you buy the IC695CEP001 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC695CEP001 online?
Answer: Yes. Automation Stop sells the IC695CEP001 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC695CEP001?
Answer: The IC695CEP001 is made by Emerson - GE Fanuc.
For additional information about IC695CEP001 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC695CEP001.
Revision Part # | Also Known As | Availability |
---|---|---|
IC695CEP001-AAAA | IC695CEP001 Series AAAA, Rev AAAA | Request a Quote |
IC695CEP001-AAAF | IC695CEP001 Series AAAF, Rev AAAF | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.