GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC695PSD040 |
| Series: | RX3i PacSystem |
| UPC: | 593797281108 |
Description:
The GE Fanuc IC695PSD040 is an RX3i PacSystem series, 40-watt power supply module. It can generate 24 volts direct current (DC) input. This device has a voltage range of 18 to 33 volts direct current (DC). No matter what type of wire is used with this terminal, it must support 6 amperes of the terminal current rating. This GE Fanuc drive supports the daisy chain configuration. This device has a ride through time of 10 milliseconds.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number IC695PSD040 is a power supply module from the RX3i PacSystem series of products. This device has an output current of 40 watts. This device is equipped with P/S failure, over-temperature, and error alerts. Also, it has overload status updates. All these are presented on the machine via LED (light emitting diode) indicators. The LEDs are mounted on the front panel. The device is shielded by a stylish blue casing. The cache is built using high-quality materials that are both attractive and useful. It adds a sleek style to the entire module. The input voltage range for the device is 18 to 30 volts DC for start mode and 12 to 30 volts DC for run mode.
The device has a maximum inrush current of 4 amperes for 100 milliseconds, as well as an output current of 0 to 6 amperes or 0 to 9 amperes. All outputs on this terminal come with 50 millivolts of noise and an embedded ripple rating. The output control mechanism of this module features an on/off switch. The switch is hidden behind the module's front door. The switch stops the user from switching the machine on or off by mistake. The wiring connectors of this module accommodate one 14 AWG to 18 AWG wire.
In a daisy-chained configuration, the unit can link up to two of these power supplies. Input overvoltage protection is also included in this power supply unit. The Input overvoltage protection is essential in many heavy-duty industrial applications. The device fits into a single slot and detects defects early enough to prevent machine damage. Also, this module can contribute to overall performance improvement.
FAQ
Question: Does Automation Stop offer repairs on the IC695PSD040?
Answer: Yes. We offer repairs for the IC695PSD040 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC695PSD040?
Answer: If you buy the IC695PSD040 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC695PSD040 online?
Answer: Yes. Automation Stop sells the IC695PSD040 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC695PSD040?
Answer: The IC695PSD040 is made by Emerson - GE Fanuc.
Series information for IC695PSD040
For additional information about IC695PSD040 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC695PSD040.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC695PSD040F | IC695PSD040 Series F, Rev F | Request a Quote |
| IC695PSD040J | IC695PSD040 Series J, Rev J | Request a Quote |
| IC695PSD040K | IC695PSD040 Series K, Rev K | Request a Quote |
| IC695PSD040M | IC695PSD040 Series M, Rev M | Request a Quote |
Common Misspellings:
- IC695PSD04O
- IC695PSDO40
- IC695PSDO4O
- IC695P5D040
- IC695P5D04O
- IC695P5DO40
- IC695P5DO4O
- IC69SPSD040
- IC69SPSD04O
- IC69SPSDO40
- IC69SPSDO4O
- IC69SP5D040
- IC69SP5D04O
- IC69SP5DO40
- IC69SP5DO4O
- ICG95PSD040
- ICG95PSD04O
- ICG95PSDO40
- ICG95PSDO4O
- ICG95P5D040
- ICG95P5D04O
- ICG95P5DO40
- ICG95P5DO4O
- ICG9SPSD040
- ICG9SPSD04O
- ICG9SPSDO40
- ICG9SPSDO4O
- ICG9SP5D040
- ICG9SP5D04O
- ICG9SP5DO40
- ICG9SP5DO4O
- 1C695PSD040
- 1C695PSD04O
- 1C695PSDO40
- 1C695PSDO4O
- 1C695P5D040
- 1C695P5D04O
- 1C695P5DO40
- 1C695P5DO4O
- 1C69SPSD040
- 1C69SPSD04O
- 1C69SPSDO40
- 1C69SPSDO4O
- 1C69SP5D040
- 1C69SP5D04O
- 1C69SP5DO40
- 1C69SP5DO4O
- 1CG95PSD040
- 1CG95PSD04O
- 1CG95PSDO40
- 1CG95PSDO4O
- 1CG95P5D040
- 1CG95P5D04O
- 1CG95P5DO40
- 1CG95P5DO4O
- 1CG9SPSD040
- 1CG9SPSD04O
- 1CG9SPSDO40
- 1CG9SPSDO4O
- 1CG9SP5D040
- 1CG9SP5D04O
- 1CG9SP5DO40
- 1CG9SP5DO4O
