GE / IP FANUC Series 90/30 In Stock
IC695SPF002
✓ In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC695SPF002 |
| Series: | RX3i PacSystem |
Description:
The GE Fanuc Automation IC695SPF002 is a small form-factor pluggable scanner module. It comes with a data transfer speed of 100 megabytes per second. 3.3 to 5 Volts is the power rating on this module. It is designed, and manufactured by GE Fanuc. It belongs to the PacSystems series of the RX3i section. The GE Fanuc Automation IC695SPF002 comes with a USB port that is only used for firmware upgrades.
Key Features:
- utilizes 3.3 to 5 volts of power
- contains scanner module
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC695SPF002 is a scanner module designed and manufactured by GE Fanuc. This product can successfully establish a connection between a remote RX3i I/O rack and a PROFINET controller. Unlike other scanner modules out there, this module has a multi-mode fiber connection equipped to it. The data transfer rate on this module is from 100 (one hundred) to 1000 (one thousand) megabytes per second, or MBps. This scanner module comes with support for all modules belonging to the GE Series 90-30. It can be used to both programs and configure this module. This device offers support for daisy-chain, star, or ring connections. Additionally, this device is equipped with four (4) Ethernet ports. Along with these Ethernet Ports, the IC695SPF002 comes with two (2) embedded RJ-45 ports. It comes equipped with a total of eight (8) conductors. There are 2 small form-factor devices on this module. In order to provide output data, this module can both scan data and retrieve input data. WinLoader is used for installing the upgrades.
The built-in USB port on part number IC695SPF002 is used specifically for running firmware upgrades. Users can transfer the names of the connected I/O module devices to other external PNS modules. For this purpose, users must use an external SD Card. This makes replacing older modules with newer ones easier. It comes with support for different types of media interfaces. The temperature rating for this module is sixty (60) degrees Celsius at the maximum. When this module is operating at a full 100 megabytes of memory, the environment temperature must not exceed fifty-seven (57) degrees Celsius.
FAQ
Question: Does Automation Stop offer repairs on the IC695SPF002?
Answer: Yes. We offer repairs for the IC695SPF002 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC695SPF002?
Answer: If you buy the IC695SPF002 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC695SPF002 online?
Answer: Yes. Automation Stop sells the IC695SPF002 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC695SPF002?
Answer: The IC695SPF002 is made by Emerson - GE Fanuc.
Series information for IC695SPF002
For additional information about IC695SPF002 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC695SPF002.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC695SPF002A | IC695SPF002 Series A, Rev A | Request a Quote |
| IC695SPF002C | IC695SPF002 Series C, Rev C | Request a Quote |
Common Misspellings:
- IC695SPF0O2
- IC695SPFO02
- IC695SPFOO2
- IC6955PF002
- IC6955PF0O2
- IC6955PFO02
- IC6955PFOO2
- IC69SSPF002
- IC69SSPF0O2
- IC69SSPFO02
- IC69SSPFOO2
- IC69S5PF002
- IC69S5PF0O2
- IC69S5PFO02
- IC69S5PFOO2
- ICG95SPF002
- ICG95SPF0O2
- ICG95SPFO02
- ICG95SPFOO2
- ICG955PF002
- ICG955PF0O2
- ICG955PFO02
- ICG955PFOO2
- ICG9SSPF002
- ICG9SSPF0O2
- ICG9SSPFO02
- ICG9SSPFOO2
- ICG9S5PF002
- ICG9S5PF0O2
- ICG9S5PFO02
- ICG9S5PFOO2
- 1C695SPF002
- 1C695SPF0O2
- 1C695SPFO02
- 1C695SPFOO2
- 1C6955PF002
- 1C6955PF0O2
- 1C6955PFO02
- 1C6955PFOO2
- 1C69SSPF002
- 1C69SSPF0O2
- 1C69SSPFO02
- 1C69SSPFOO2
- 1C69S5PF002
- 1C69S5PF0O2
- 1C69S5PFO02
- 1C69S5PFOO2
- 1CG95SPF002
- 1CG95SPF0O2
- 1CG95SPFO02
- 1CG95SPFOO2
- 1CG955PF002
- 1CG955PF0O2
- 1CG955PFO02
- 1CG955PFOO2
- 1CG9SSPF002
- 1CG9SSPF0O2
- 1CG9SSPFO02
- 1CG9SSPFOO2
- 1CG9S5PF002
- 1CG9S5PF0O2
- 1CG9S5PFO02
- 1CG9S5PFOO2
