GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC698CMX016

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC698CMX016
Series: RX7i
UPC: 339764907615

Description:

The IC698CMX016 is a reflective memory module manufactured by GE Fanuc Automation and belongs to the RX7i PACSystems modules. The module is used for a high communications exchange rate between the CPU and different devices attached to the RX7i PLCs.


Key Features:

  • incorporates 1.8 amps as current rating

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The IC698CMX016 is a control memory exchange module manufactured by the GE Fanuc Automation from the RX7i series. This communication module is used for the PACSystems RX7i Programmable Logic Controllers. It provides a high communication exchange rate between CPUs and devices attached to the RX7i PLCs. The module is easy to install and configure according to the requirements and standards of the RX7i Series PACSystems PLCs. This module can be installed in one of the racks of the RX7i PLC and doesn’t require using any additional protocols for operations. The effective data rate used by the IC698CMX016 control memory module is 2.12 Gigabauds and the module doesn’t provide isolation between the connections. The reflective memory capacity of the module is up to 16 Megabytes and the maximum supported distance between the modes is a maximum of 300 Meters.
In the worst-case scenario, the IC698CMX016 module has an access time of 400 nanoseconds, while at the best, the access time is 200 nanoseconds. The module provides a transfer rate of 6.2 Megabytes per second without using redundant transfers and a rate of 3.2 megabytes per second using redundant transfers. It is used with LC type connectors and multimode fiber optic cables (up to 1000 meters). The operating current of the module is 1.2 Amperes drawn from a 5 Volt Bus. For configuring the module, Proficy Machine Edition Logic Developer Software version 4.5 or later is used. It comes with 256 nodes per network and can perform redundant transfer mode operations. This mode of operation can reduce the chances of data drop or loss in the network.

Technical Specifications

User Memory 16 Megabytes
Operating Voltage +5 Volts DC (from power supply)
Current Requirements 1.8 Amperes
Reflective Memory 128 Megabytes
Transfer Rate 2.1 Gigabytes
Module Type Redundancy Module
Optic Network Speed 2.12 Gigabaud
Temperature Range of Connectors -20 to 85 degrees Celsius
Packet Size 4 to 64 bytes
Physical Size PCB: 6.299 Width x 9.187 Height, in Inches
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC698CMX016?

Answer: Yes. We offer repairs for the IC698CMX016 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC698CMX016?

Answer: If you buy the IC698CMX016 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC698CMX016 online?

Answer: Yes. Automation Stop sells the IC698CMX016 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC698CMX016?

Answer: The IC698CMX016 is made by Emerson - GE Fanuc.


Question: What is the Current Requirements of the IC698CMX016?

Answer: The Rockwell-Automation IC698CMX016 has a Current Requirements of 1.8 Amperes.


Question: What Module Type is included with the Allen Bradley-Rockwell Automation IC698CMX016?

Answer: The Allen Bradley-Rockwell Automation IC698CMX016 has a Redundancy Module Module Type.


Question: What Operating Voltage does the Allen Bradley Automation IC698CMX016 have?

Answer: The Allen Bradley Automation IC698CMX016 has a Operating Voltage of +5 Volts DC (direct current) (from power supply).


Question: What is the Optic Network Speed of the Allen-Bradley IC698CMX016?

Answer: The Allen-Bradley IC698CMX016 has a Optic Network Speed of 2.12 Gigabaud.


Question: What Packet Size does the IC698CMX016 have?

Answer: The Rockwell-Automation IC698CMX016 has a Packet Size of 4 to 64 bytes.


Question: What is the Physical Size of the IC698CMX016?

Answer: The IC698CMX016 has a Physical Size of PCB: 6.299 Width x 9.187 Height, in (in).


Question: What Reflective random-access memory (RAM) does the Allen-Bradley IC698CMX016 have?

Answer: The Allen-Bradley IC698CMX016 has a Reflective random-access memory (RAM) of 128 Megabytes.


Question: What Temperature Range of Connectors does the IC698CMX016 have?

Answer: The IC698CMX016 has a Temperature Range of Connectors of -20 to 85 degrees Celsius.


Question: What is the Transfer Rate of the IC698CMX016?

Answer: The Transfer Rate of the IC698CMX016 is 2.1 Gigabytes.


Question: What is the User random-access memory (RAM) of the IC698CMX016?

Answer: The IC698CMX016 has a User random-access memory (RAM) of 16 Megabytes.


Series information for IC698CMX016

For additional information about IC698CMX016 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC698CMX016.

Revision Part # Also Known As Availability

Common Misspellings:

  • IC698CMX01G
  • IC698CMX0I6
  • IC698CMX0IG
  • IC698CMXO16
  • IC698CMXO1G
  • IC698CMXOI6
  • IC698CMXOIG
  • IC69BCMX016
  • IC69BCMX01G
  • IC69BCMX0I6
  • IC69BCMX0IG
  • IC69BCMXO16
  • IC69BCMXO1G
  • IC69BCMXOI6
  • IC69BCMXOIG
  • ICG98CMX016
  • ICG98CMX01G
  • ICG98CMX0I6
  • ICG98CMX0IG
  • ICG98CMXO16
  • ICG98CMXO1G
  • ICG98CMXOI6
  • ICG98CMXOIG
  • ICG9BCMX016
  • ICG9BCMX01G
  • ICG9BCMX0I6
  • ICG9BCMX0IG
  • ICG9BCMXO16
  • ICG9BCMXO1G
  • ICG9BCMXOI6
  • ICG9BCMXOIG
  • 1C698CMX016
  • 1C698CMX01G
  • 1C698CMX0I6
  • 1C698CMX0IG
  • 1C698CMXO16
  • 1C698CMXO1G
  • 1C698CMXOI6
  • 1C698CMXOIG
  • 1C69BCMX016
  • 1C69BCMX01G
  • 1C69BCMX0I6
  • 1C69BCMX0IG
  • 1C69BCMXO16
  • 1C69BCMXO1G
  • 1C69BCMXOI6
  • 1C69BCMXOIG
  • 1CG98CMX016
  • 1CG98CMX01G
  • 1CG98CMX0I6
  • 1CG98CMX0IG
  • 1CG98CMXO16
  • 1CG98CMXO1G
  • 1CG98CMXOI6
  • 1CG98CMXOIG
  • 1CG9BCMX016
  • 1CG9BCMX01G
  • 1CG9BCMX0I6
  • 1CG9BCMX0IG
  • 1CG9BCMXO16
  • 1CG9BCMXO1G
  • 1CG9BCMXOI6
  • 1CG9BCMXOIG

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP