GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC693APU302

✓ In Stock

IC693APU302 Image 1 thumbnail
IC693APU302 Image 2 thumbnail
IC693APU302 Image 3 thumbnail
IC693APU302 Image 4 thumbnail
IC693APU302 Image 5 thumbnail
IC693APU302 Image 6 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC693APU302
Series: Series 90-30
UPC: 799705792876

Description:

The IC693APU302 is a 90-30 series axis positioning model. The module comes with 2-axis, and it is a product by GE Fanuc Automation. It is an entirely programmable module with 2-axis motion control functionality that allows complex PLC logic functions in a single system. The IC693APU302 has two modes of operation: follower and standard.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$2,988.00

Available: 1

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$2,391.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a IC693APU302? We can help!

Request a Quote

Key Features:

  • is discontinued/obsolete

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The C693APU302 is a configurable two-axis motion control module for the Series 90-30 PLC. The Motion Mate APM is a straightforward smart APM that allows a PLC user to combine high-level control and PLC logic resolution features in a single device. In addition, the APM has two distinct functions/modes: the standard model and the follower mode. When the APM uses standard mode, it integrates high-performance motion control with PLC logic solving capabilities into a single integrated system. When APM uses the follower mode, it provides high-performance electronic gearing for continuous master/slave applications. In addition to these two modes, it has a servo loop feature that updates the system at the time of 2ms. Besides that, the model uses the VersaPro software tool's version number 1.1 or later, and the connector types compatible with this model are 24-pin High Density, 25-pin D Type. Since the Series 90-30 and the APM work together as a single motion control system. As a result, specifying a setup parameter in the configuration tool simplifies selecting the user's preferred mode. The APM controls axis motion and handles all direct contacts with the drive and machine, while the PLC constantly transfers data between PLC tables and the APM. Moreover, the PLC also allows for the connection of Operator interfaces, which can control and monitor the system's operation. This model is also capable of helping users with the commands such as velocity, forward, move, and acceleration/deceleration. The model requires 800milliAmps of current at +5 Volts DC voltage for internal power consumption.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series 90-30
Part Number IC693APU302
Description Motion mate positioning module (APM)
Module type intelligent motion control module
Number of axes 2
Load requirement 800 mA at +5 VDC
Mode of functionality standard or follower mode
Mounting options remote or expansion baseplate, baseplate or any of the Series 90-30 CPU
Number of APM with CPUs 3 with an embedded CPU and 8 with a modular CPU.
Status LEDs 5
Number of connectors 2
Type of connectors 24-pin high-density connectors
Voltage rating 5 VDC
Connection type 24-pin I/O connector , a cable, and a 25-pin D-type terminal block connector
Weight 510 g (1.12 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC693APU302?

Answer: Yes. We offer repairs for the IC693APU302 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC693APU302?

Answer: If you buy the IC693APU302 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC693APU302 online?

Answer: Yes. Automation Stop sells the IC693APU302 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC693APU302?

Answer: The IC693APU302 is made by Emerson - GE Fanuc.


Question: What Brand does the Rockwell-Automation IC693APU302 have?

Answer: The Rockwell-Automation IC693APU302 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What Connection type does the IC693APU302 have?

Answer: The Rockwell Automation IC693APU302 has a Connection type of 24-pin input/output connector , a cable, and a 25-pin D-type terminal block connector.


Question: What Description is included with the IC693APU302?

Answer: The Allen Bradley Automation IC693APU302 has a Motion mate positioning module (APM) Description.


Question: What Load requirement does the IC693APU302 have?

Answer: The Load requirement of the IC693APU302 is 800 mA at +5 VDC.


Question: What Mode of functionality does the Allen Bradley Automation IC693APU302 have?

Answer: The Allen Bradley Automation IC693APU302 has a standard or follower mode Mode of functionality.


Question: What Module type is included with the IC693APU302?

Answer: The Allen-Bradley IC693APU302 has a intelligent motion control module Module type.


Question: What is the Mounting options of the IC693APU302?

Answer: The Mounting options of the IC693APU302 is remote or expansion baseplate, baseplate or any of the Series 90-30 central processing unit (CPU).


Question: What is the Number of APM with CPUs of the IC693APU302?

Answer: The Number of APM with CPUs of the IC693APU302 is 3 with an embedded central processing unit (CPU) and 8 with a modular central processing unit (CPU)..


Question: What is the Number of axes of the IC693APU302?

Answer: The IC693APU302 has a Number of axes of 2.


Question: What Number of connectors does the IC693APU302 have?

Answer: The Allen Bradley IC693APU302 has a Number of connectors of 2.


Question: What part Number does the Rockwell-Automation IC693APU302 have?

Answer: The Rockwell-Automation IC693APU302 has a part Number of IC693APU302.


Question: What Status LEDs does the Allen Bradley-Rockwell Automation IC693APU302 have?

Answer: The Allen Bradley-Rockwell Automation IC693APU302 has a Status LEDs of 5.


Question: What is the Type of connectors of the IC693APU302?

Answer: The IC693APU302 has a Type of connectors of 24-pin high-density connectors.


Question: What is the Voltage rating of the IC693APU302?

Answer: The IC693APU302 has a Voltage rating of 5 VDC.


Question: What Weight does the IC693APU302 have?

Answer: The Weight of the Allen-Bradley IC693APU302 is 510 g (1.12 lb).


Series information for IC693APU302

For additional information about IC693APU302 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693APU302.

Revision Part # Also Known As Availability
IC693APU302L IC693APU302 Series L, Rev L Request a Quote
IC693APU302M IC693APU302 Series M, Rev M Request a Quote
IC693APU302N IC693APU302 Series N, Rev N Request a Quote
IC693APU302P IC693APU302 Series P, Rev P Request a Quote

Common Misspellings:

  • IC693APU3O2
  • ICG93APU302
  • ICG93APU3O2
  • 1C693APU302
  • 1C693APU3O2
  • 1CG93APU302
  • 1CG93APU3O2

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP