GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC693BEM321 |
Series: | Series 90-30 |
UPC: | 442542237733 |
Description:
Part number IC693BEM321 is a GE Fanuc link master module from the Series 90-30 product line. This device is used to serve as master in I/O LINK systems. It features serial interface for high speed and can accept up to 16 slaves. This device can accept 1024 discrete inputs and send 1024 outputs. When mounted in a Series 90-30 PLC, there is no limit on the number of link modules. However, when mounted in a CPU backplane, a maximum of 6 modules can be accepted.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Item number IC693BEM321 is a link master module, manufactured by Emerson - GE Fanuc. It is part of the Series 90-30 I/O series, and it is used in application with Series 90-30 PLCs to act as master in a I/O LINK system. The IC693BEM321 module is equipped with serial interface, providing high-speed I/O data transfer between the master and up to sixteen (16) slaves. The most common slaves found are GE Fanuc equipment like CNCs type Mate / Series 0, Series 90-70 / 90-30 PLCs, connection units, and operator panels. The master is capable of accepting 1024 discrete inputs from slaves and sending 1024 discrete outputs.
There is no limitation on the amount of master modules that can be installed in a Series 90-30 PLC. In case there are multiple master modules in the same PLC, they should be on separate I/O LINK systems. When installed in CPU baseplate, the maximum acceptable number of I/O LINK modules is 6. When it comes to restarting this module, there is a pushbutton available. The module has 3 LED status indicators, which include the Module OK (OK), Module Configured (CFG) and Link Active (ACTV). This device possesses one (1) 20-pin type Honda connector, in which its signal is compatible with RS-422 and RS-485. The maximum length between the master and the first slave or between two slaves is 10 meters (33 feet) in case electrical cable is used and 100 meters (330 feet) when / if an optical cable is used. If a transition from electrical to optical cable or vise-versa is needed, the unit must use an additional optical adapter.
Question: Does Automation Stop offer repairs on the IC693BEM321?
Answer: Yes. We offer repairs for the IC693BEM321 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693BEM321?
Answer: If you buy the IC693BEM321 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693BEM321 online?
Answer: Yes. Automation Stop sells the IC693BEM321 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693BEM321?
Answer: The IC693BEM321 is made by Emerson - GE Fanuc.
For additional information about IC693BEM321 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693BEM321.
Revision Part # | Also Known As | Availability |
---|---|---|
IC693BEM321B | IC693BEM321 Series B, Rev B | Request a Quote |
IC693BEM321F | IC693BEM321 Series F, Rev F | Request a Quote |
IC693BEM321G | IC693BEM321 Series G, Rev G | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.