GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC693CBL325 |
Series: | Series 90-30 |
Description:
The GE Fanuc catalog number IC693CBL325 is a 10-foot input/output terminal board interface cable (3 meters). In addition, this terminal board cable supports the shield wiring features and integrates well with DSL and Servo modules. Moreover, the terminal board interface cable comes with a 36-Pin Connector, supporting cable housing and providing a powerful interface among PLC modules.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC693CBL325 is a terminal board connection I/O cable. The cable accessory is designed for the use of the GE Fanuc 90-30 Systems. In addition, it has a length of 3 meters 10 ft and is a cable type of interface. The module supports the 36-Pin Connector type. The application of this interface cable is to establish the connection between DSM modules and servo Axis Terminal Board. The cable comes with continuous shield protection and weighs 2.0 pounds. Further, it also supports the housing feature, unlike most of the similar counterparts in the same series. Apart from that, this cable features a conducting material that includes 28 AWG Size wires. The interface connection connects the DSM's various models to a terminal board or a spare monitor board. The GE Series 90-30 terminal board interface cable, which is 1 meter long, can be used to replace the terminal board interface cable. This cable, unlike the 1-meter Cables, has a length of up to 3 meters (10 feet), allowing for a greater distance between modules. It can also be connected to an auxiliary terminal block or a servo axis terminal board. In addition, the cable also includes two 36-pin connectors with the letters "DSM" and "SERVO" on them. This cable can be extended using other DMS models in the same PLC series. Hence, the length of the cable for the connection and interface is substantial. In addition to the extension and length, this cable also has a durable and long-lasting quality.
Question: Does Automation Stop offer repairs on the IC693CBL325?
Answer: Yes. We offer repairs for the IC693CBL325 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693CBL325?
Answer: If you buy the IC693CBL325 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693CBL325 online?
Answer: Yes. Automation Stop sells the IC693CBL325 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693CBL325?
Answer: The IC693CBL325 is made by Emerson - GE Fanuc.
Question: What can I expect the voltage included with the IC693CBL325 to be?
Answer: The IC693CBL325 has a voltage of 5.
For additional information about IC693CBL325 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693CBL325.
Revision Part # | Also Known As | Availability |
---|---|---|
IC693CBL325A | IC693CBL325 Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.