GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC693CBL327

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC693CBL327
Series: Series 90-30

Description:

The IC693CBL327 cable, which is designed and produced by GE Fanuc, is an accessory for the Series 90-30 PLC modules. This cable aids these modules in connecting to different types of devices. These cables have right angle connectors and are widely used in place of the obsolete cables because of the advantages these offer. This cable has a length of ten (10) feet. On one end of the cable, there is a 24 pin female connector, while on the other end, there is a set of stripped wires.


Key Features:

  • has been discontinued/obsolete

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

This cable created and designed by GE Fanuc, with the catalogue number IC693CBL327, is an accessory for the Series 90-30 programmable logic controller (PLC) modules that are commonly used for different applications. This cable by GE Fanuc helps operators connect the PLC modules to different types of devices. These cables also have right angle connectors integrated in them. Because of the advantages they offer, these cables are also widely used by various industries and operators as a replacement of the obsolete cables that were previously used. They are ten (10) feet long in length with a twenty-four (24) pin D female connector on one end and on the other end, they have a set of stripped wires. Moreover, this tool is an unshielded cable with a connector depth rating of two (2) inches. During the installation process of this tool, it is necessary for operators to make sure that this tool is being connected to is deep enough or else the PLC and the GE Fanuc IC693CBL327 might get damaged. The cables have many applications, and they should be used with series 90-30 input / output modules with a Fujitsu twenty-four (24) pin connector. Moreover, these modules are either thirty-two (32) point modules or sixteen (16) point modules. Furthermore, the cables can be used to connect to a user supplied terminal strip or directly to an input output device, such as switches or lights, and the cables can be used by operators to connect to a TBQC terminal block, as well.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC693CBL327?

Answer: Yes. We offer repairs for the IC693CBL327 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC693CBL327?

Answer: If you buy the IC693CBL327 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC693CBL327 online?

Answer: Yes. Automation Stop sells the IC693CBL327 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC693CBL327?

Answer: The IC693CBL327 is made by Emerson - GE Fanuc.


Series information for IC693CBL327

For additional information about IC693CBL327 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693CBL327.

Revision Part # Also Known As Availability
IC693CBL327C IC693CBL327 Series C, Rev C Request a Quote

Common Misspellings:

  • IC693C8L327
  • ICG93CBL327
  • ICG93C8L327
  • 1C693CBL327
  • 1C693C8L327
  • 1CG93CBL327
  • 1CG93C8L327

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP