GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC693CHS397

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC693CHS397
Series: Series 90-30
UPC: 643770290914

Description:

The GE Fanuc Emerson IC693CHS397 is a 5-slot CPU baseplate that contains a female twenty-five D-type pin connector that is installed at the right side end to link other baseplates. This modular baseplate permits operators to add I/O modules of the PLC and improving the control using a single processor. The IC693CHS397 can be employed for PLC systems with I/O which are near to the local chassis.


Key Features:

  • operates at 5 volts dc for voltage
  • is discontinued/obsolete

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$431.00

Available: 2

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$135.00

Available: 87

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$108.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a IC693CHS397? We can help!

Request a Quote

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC693CHS397 is a 5-slot CPU baseplate that contains a female twenty-five D-type pin connector that is installed at the right side end to link other baseplates. This baseplate includes four slots for I/O devices and one extra slot for the power supply. This modular baseplate permits operators to add I/O modules of the PLC and improving the control using a single processor. The IC693CHS397 can be used for PLC systems with I/O that are near to the local chassis. The device consumes a current of 270 milliamperes at a baseplate voltage of 5 volts DC. The baseplate has a width of 26.49 centimeters (10.43 inches), a height of 13 centimeters (5.12 inches), and a depth of 14.2 centimeters (5.59 inches).

The IC693CHS397 CPU baseplate includes 5 slots that are serially labeled from 1 to 5. This unit can be connected to both remote and expansion baseplates. The device supports a non-condensing relative humidity range from 5 percent to 95 percent. The unit operates at an altitude of up to 1000 meters (3300 feet) without deterioration. The IC693CHS397 is employed in many industrial applications to extend I/O modules of the baseplate and is compatible with all I/O modules and also remote baseplates. The device supports a vibration frequency range from 10 hertz to 2 kilohertz. The IC693CHS397 CPU baseplate operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications and weighs approximately 730 grams (1.6 pounds) while shipping.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series 90-30
Part Number IC693CHS397
Description 5-slot CPU baseplate
Load requirement 270 mA at +5 VDC
Baseplate option Main (With CPU Slot)
Distance N/A
Number of slots 5
Dimensions 10.43 x 5.12 x 5.59 in. (245x130x142 mm)(W x H x D)
Voltage 5 Volts DC
Compatibility 90-30 PLCs
Maximum number of CPUs supported 1, 4 slots for I/O modules, and 1 extra slot for the power supply
Weight 730 g (1.6 lb.)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC693CHS397?

Answer: Yes. We offer repairs for the IC693CHS397 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC693CHS397?

Answer: If you buy the IC693CHS397 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC693CHS397 online?

Answer: Yes. Automation Stop sells the IC693CHS397 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC693CHS397?

Answer: The IC693CHS397 is made by Emerson - GE Fanuc.


Question: What Baseplate option is included with the Rockwell-Automation IC693CHS397?

Answer: The Rockwell-Automation IC693CHS397 has a Main (With central processing unit (CPU) Slot) Baseplate option.


Question: What Brand does the Allen Bradley/Rockwell Automation IC693CHS397 have?

Answer: The Allen Bradley/Rockwell Automation IC693CHS397 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What Compatibility does the IC693CHS397 have?

Answer: The IC693CHS397 has a Compatibility of 90-30 PLCs.


Question: What is the Description of the Allen Bradley Automation IC693CHS397?

Answer: The Description of the Allen Bradley Automation IC693CHS397 is 5-slot central processing unit (CPU) baseplate.


Question: What is the Dimensions of the Allen Bradley Automation IC693CHS397?

Answer: The IC693CHS397 has a Dimensions of 10.43 x 5.12 x 5.59 in. (245x130x142 mm)(W x H x D).


Question: What Distance does the IC693CHS397 have?

Answer: The IC693CHS397 has a N/A Distance.


Question: What Load requirement does the IC693CHS397 have?

Answer: The Load requirement of the Allen-Bradley IC693CHS397 is 270 mA at +5 VDC.


Question: What Maximum number of CPUs supported does the IC693CHS397 have?

Answer: The Maximum number of CPUs supported of the Allen Bradley-Rockwell Automation IC693CHS397 is 1, 4 slots for input/output modules, and 1 extra slot for the power supply unit.


Question: What is the Number of slots of the IC693CHS397?

Answer: The Number of slots of the Allen Bradley/Rockwell Automation IC693CHS397 is 5.


Question: What unit Number does the IC693CHS397 have?

Answer: The part Number of the Rockwell Automation IC693CHS397 is IC693CHS397.


Question: What is the Voltage of the Allen Bradley IC693CHS397?

Answer: The Voltage of the Allen Bradley IC693CHS397 is 5 Volts direct current.


Question: What is the Weight of the Allen-Bradley IC693CHS397?

Answer: The IC693CHS397 has a Weight of 730 g (1.6 lb.).


Series information for IC693CHS397

For additional information about IC693CHS397 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693CHS397.

Revision Part # Also Known As Availability
IC693CHS397B IC693CHS397 Series B, Rev B Request a Quote
IC693CHS397C IC693CHS397 Series C, Rev C Request a Quote
IC693CHS397F IC693CHS397 Series F, Rev F Request a Quote
IC693CHS397H IC693CHS397 Series H, Rev H Request a Quote
IC693CHS397J IC693CHS397 Series J, Rev J Request a Quote
IC693CHS397K IC693CHS397 Series K, Rev K Request a Quote
IC693CHS397L IC693CHS397 Series L, Rev L Request a Quote
IC693CHS397-LCA1 IC693CHS397 Series LCA1, Rev LCA1 Request a Quote
IC693CHS397M IC693CHS397 Series M, Rev M Request a Quote

Common Misspellings:

  • IC693CH5397
  • ICG93CHS397
  • ICG93CH5397
  • 1C693CHS397
  • 1C693CH5397
  • 1CG93CHS397
  • 1CG93CH5397

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP