GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC693CMM321 |
| Series: | Series 90-30 |
| UPC: | 186097397077 |
Description:
The IC693CMM321, an Ethernet interface module, is used to connect Series 90-30 programmable logic controllers to an Ethernet LAN. An external transceiver and an AAUI cable are used to accomplish this. This module has one (1) RS-232, RJ11 serial port for the station manager, one (1) RS-485, 15-pin, D-type serial port for the software loader, and one (1) AAUI port for connecting the module to an Ethernet network. Furthermore, this GE Fanuc module is equipped with four (4) LEDs.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Adding Items to Cart
Adding Items to Cart
Looking for a IC693CMM321? We can help!
Request a QuoteKey Features:
- has been discontinued/obsolete
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
An Ethernet interface module, the IC693CMM321 is used to link Series 90-30 programmable logic controllers (PLCs) to an Ethernet LAN. This is accomplished with the use of an external transceiver and an AAUI cable. This interface includes client-server functionality. This interface lets the user connect their PLC to a network, initiate data transfer, and communicate with several devices from different manufacturers at the same time. Furthermore, diagnostic tools may be used to confirm that the system is functioning properly. This module consists of one (1) RS-232, RJ11 serial port that serves as a station manager, one (1) RS-485, 15-pin, D-type serial port that serves as a software loader, and one (1) AAUI port that serves as a network port for connecting the module to an Ethernet network. On the top of the board, there are four (4) LED's, and below them is a restart push button. OK, LAN, SER, and STAT are the LEDs. They can exist in one of four states. They'll either be on, off, flashing slowly, or flashing quickly. These depict the current state & traffic at different times. They also show the condition of the interface as a whole. This device requires a CPU version of 6.5 or above to work properly. Configuration may be done with a variety of programming applications. Control version 2.01 or higher, Logic-master 90 30 version 6.01 or higher, and Versa-Pro version 1.0 or higher are some of the most prevalent versions. All of these programs are installed on a PC. The default MAC address is mounted on the plastic housing's outside surface.
FAQ
Question: Does Automation Stop offer repairs on the IC693CMM321?
Answer: Yes. We offer repairs for the IC693CMM321 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693CMM321?
Answer: If you buy the IC693CMM321 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693CMM321 online?
Answer: Yes. Automation Stop sells the IC693CMM321 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693CMM321?
Answer: The IC693CMM321 is made by Emerson - GE Fanuc.
Series information for IC693CMM321
For additional information about IC693CMM321 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693CMM321.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC693CMM321-AA | IC693CMM321 Series AA, Rev AA | Request a Quote |
| IC693CMM321-CC | IC693CMM321 Series CC, Rev CC | Request a Quote |
| IC693CMM321-CD | IC693CMM321 Series CD, Rev CD | Request a Quote |
| IC693CMM321-DD | IC693CMM321 Series DD, Rev DD | Request a Quote |
| IC693CMM321-DD/CA | IC693CMM321 Series DD/CA, Rev DD/CA | Request a Quote |
| IC693CMM321-DE | IC693CMM321 Series DE, Rev DE | Request a Quote |
| IC693CMM321-EE | IC693CMM321 Series EE, Rev EE | Request a Quote |
| IC693CMM321-EF | IC693CMM321 Series EF, Rev EF | Request a Quote |
| IC693CMM321-FG | IC693CMM321 Series FG, Rev FG | Request a Quote |
| IC693CMM321-GH | IC693CMM321 Series GH, Rev GH | Request a Quote |
| IC693CMM321-HJ | IC693CMM321 Series HJ, Rev HJ | Request a Quote |
| IC693CMM321-JJ | IC693CMM321 Series JJ, Rev JJ | Request a Quote |
Common Misspellings:
- IC693CMM32I
- ICG93CMM321
- ICG93CMM32I
- 1C693CMM321
- 1C693CMM32I
- 1CG93CMM321
- 1CG93CMM32I
