GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC693CPU340 |
Series: | Series 90-30 |
UPC: | 23663132055 |
Description:
The IC693CPU340 is a CPU 340 module with 32 kilobytes of user memory and 10 kilobytes of registers that fits into a single slot. One CPU baseplate and four extension baseplates are included in each system. The Analog Inputs- percent A1 and Analog Outputs- percent AQ of the IC693CPU340 are made up of 128 and 64 words, respectively.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC693CPU340 is a CPU module by GE Fanuc (90-30 System for PLC). This module is a single slot PLC module with a clock speed of 20 Megahertz, and it has an 80C188XL microprocessor. The CPU module features 19.9 kilobytes of register memory and 32 kilobytes of user program memory. However, this CPU module does not support floating-point math for the Boolean contacts. But the module does support a flashing memory for storing user programs. This flash memory on this module includes features like (READ, WRITE, VERIFY) functions. These functions are accessible through the program utility menu or program utility screen in the Logic-master or microprogramming software. Moreover, it supports five baseplates, one for CPU and four for expansion or remote features. Furthermore, it has 0.3 ms for one thousand logic boolean contacts of a standard scan rate, and it has 1280 bits %G and 1024 bits of %M and 256 bits of %T. The system status reference for this module is 128 bits (%S, %SA, %SB, %SC - 32 bits each. The module can accept the 9999 words for register memory and 1024 words for analog input, and 256 for analog output. Besides that, the module also comes with a backup battery. It also has shift registers and a time counter feature with a value set of greater than 2K. In addition, it has 512 I/O points for input and output for each channel, and a current range of 490 milliamperes and a voltage input of 5 V DC.
Question: Does Automation Stop offer repairs on the IC693CPU340?
Answer: Yes. We offer repairs for the IC693CPU340 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693CPU340?
Answer: If you buy the IC693CPU340 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693CPU340 online?
Answer: Yes. Automation Stop sells the IC693CPU340 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693CPU340?
Answer: The IC693CPU340 is made by Emerson - GE Fanuc.
For additional information about IC693CPU340 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693CPU340.
Revision Part # | Also Known As | Availability |
---|---|---|
IC693CPU340A | IC693CPU340 Series A, Rev A | Request a Quote |
IC693CPU340D | IC693CPU340 Series D, Rev D | Request a Quote |
IC693CPU340F | IC693CPU340 Series F, Rev F | Request a Quote |
IC693CPU340H | IC693CPU340 Series H, Rev H | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.