GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC693MDL260 |
Series: | Series 90-30 |
UPC: | 715861661375 |
Description:
The GE Fanuc IC693MDL260 is a 120 volts AC grouped input module with 32 fully isolated input points. The module's input voltage is rated at 70 to 132 volts AC at 47 to 63 hertz, with a current rated at 12 milliamperes. The module?s input points are arranged in 4 groups of 8 with a shared connection. This device has a continuous isolation of 264 volts AC, as well as 1500 volts AC for 1 minute. The module?s power consumption is rated at 220 milliamperes at 5 volts DC with all the inputs turned on.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc IC693MDL260 is a grouped input module with a voltage rating of 120 volts AC. The module uses an AC power supply rated at 70 to 132 volts AC at an operating frequency range of 47 to 63 hertz. Its input current is at 12 mA at the rated voltage with a power consumption specified at 220 mA at 5 volts DC when all the inputs are on. This module is equipped with thirty-two (32) isolated input points designed in four (4) distinct groups with eight (8) input points each. All input groups are fully isolated with Field to Backplane and group to group isolation specified at 264 volts AC continuous, as well as 1500 volts AC for one (1) minute. The groups share a common connection. The grouped input module can be adequately installed in any I/O slot.
Additional features and benefits of the IC693MDL260 module include variety of implementation styles of the terminal block (spring or box style). This module requires additional shroud depth when field-wired to AC devices. It is compatible with Programmable Logic Controller (PLC) systems belonging to the GE Fanuc Series 90-30 product line. This module houses a DIP switch on the back panel that allows user selectable control of input filter times from 20 milliseconds to 2540 milliseconds in 20-millisecond increments. The top panel of the module houses thirty-two (32) LEDs for status indication of the input points. This module provides a separate LED for indication of terminal block locking, showing red when it is not properly locked. The module has an estimated shipping weight of 0.32 kilograms.
Question: Does Automation Stop offer repairs on the IC693MDL260?
Answer: Yes. We offer repairs for the IC693MDL260 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693MDL260?
Answer: If you buy the IC693MDL260 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693MDL260 online?
Answer: Yes. Automation Stop sells the IC693MDL260 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693MDL260?
Answer: The IC693MDL260 is made by Emerson - GE Fanuc.
Question: What VAC (voltage alternating current) is included with the IC693MDL260?
Answer: The IC693MDL260 has a VAC (voltage alternating current) of 120.
For additional information about IC693MDL260 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693MDL260.
Revision Part # | Also Known As | Availability |
---|---|---|
IC693MDL260-AA | IC693MDL260 Series AA, Rev AA | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.