GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC693MDL641 |
| Series: | Series 90-30 |
| UPC: | 174329376105 |
Description:
GE Fanuc Automation created the IC693MDL641 discrete input module, which is a part of the 90-30 series PLC system and contains 16 inputs. This module's inputs allow up to 16 items of external apparatus to be integrated into the PLC. The IC693MDL641 is a small module, holding approximately 1 Kilogram. This module requires an 80 mA power source from a 5V Dc supply. This module has distinct LED indications for each of its inputs, as well as labels indicating whether an input is becoming active or inactive.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Adding Items to Cart
Looking for a IC693MDL641? We can help!
Request a QuoteKey Features:
- ships with input voltage of 0 to 30 vdc
- comes with a input module
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC693MDL641 module produced by GE Fanuc Automation is an I/O module and is part of the GE PLC Series 90-30 product range. This series contains many items that may be used in a complete application operating procedure that includes the PLC and all of its peripherals, as well as the wiring. This element was created to serve as a link between both the PLC and external input devices like push-button, sensors, and contractors, among many other things. The GE Fanuc Automation IC693MDL641 I/O device has 16 inputs and runs on a negative logical system. This component has a voltage level of 24 Volts DC and a required voltage ranging from -30 to 30 Volts Direct Current.
Each of the inputs on the IC693MDL641 I/O module from GE Fanuc Automation has a distinct LED indication and labeling that identify if the input is now on or off state. Whether there is an issue with the input, it will also be displayed here. The on-state power supply for this device is 15 to 30 Volts DC, while the off-state voltage range is -30 to 5 Volts DC. It also has a maximum rated current of 1.5 milliamps (off-state) and a minimum current rating of 4 milliamps (on-state). The GE Fanuc Automation IC693MDL641 I/O module requires a power supply from the users. When running on the backplane, this module uses 5 Volts of power, including all of its inputs, and 120 Volts of supply from 24 Volts (isolated voltage) backplane bus or a supplied voltage by users. To minimize difficulties throughout the operation, it is suggested that this module be installed in a tidy, dry environment free of corrosive materials or gases.
FAQ
Question: Does Automation Stop offer repairs on the IC693MDL641?
Answer: Yes. We offer repairs for the IC693MDL641 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693MDL641?
Answer: If you buy the IC693MDL641 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693MDL641 online?
Answer: Yes. Automation Stop sells the IC693MDL641 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693MDL641?
Answer: The IC693MDL641 is made by Emerson - GE Fanuc.
Series information for IC693MDL641
For additional information about IC693MDL641 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693MDL641.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC693MDL641C | IC693MDL641 Series C, Rev C | Request a Quote |
Common Misspellings:
- IC693MDL64I
- IC693MDLG41
- IC693MDLG4I
- ICG93MDL641
- ICG93MDL64I
- ICG93MDLG41
- ICG93MDLG4I
- 1C693MDL641
- 1C693MDL64I
- 1C693MDLG41
- 1C693MDLG4I
- 1CG93MDL641
- 1CG93MDL64I
- 1CG93MDLG41
- 1CG93MDLG4I
