GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC693MDL930 |
| Series: | Series 90-30 |
| UPC: | 246834891845 |
Description:
The IC693MDL930 is a relay output module with an isolated relay output. It can be fitted in any vacant slot on a 5-slot or 10-slot baseplate and is fitted with the Series 90-30 PLC. The module usually has open relay channels that operate associated user loads such as relay, indicators, and motor starters. The current switching capability of each output channel is 4amp.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Adding Items to Cart
Looking for a IC693MDL930? We can help!
Request a QuoteKey Features:
- provides an operating temperature of 0 to 50 degrees celsius
- has been discontinued/obsolete
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC693MDL930 is an isolated output relay module with four amps and 8 points. The output switching capacity of every circuit on this relay module is 4 amps. The module belongs to the GE Fanuc PAC system RX3i 90-30 Series. In addition, the relay module takes an input voltage of 24 V DC or 120V to 200 V AC. The operating voltage of this relay module ranges between 5V to 30V DC. Moreover, the module also comes with eight isolated outputs. The maximum load on this relay module is 10mA, while the maximum inrush is 5 amps only. The isolated output relay module has a response time of 15 ms max for ON and 15 ms max for off. Besides, the power consumption of this relay is 6 mA (when all of the outputs are active), especially from the 5 V bus on the backplane and 70 mA (when all of the outputs are active) from the relay 24 V bus on the backplane. Furthermore, the relay output module features an LED status display ON/OFF for each output point so that users can thus track the state of the operation. Apart from that, users might take precautions while using the device on the DC power source, since dropouts in the voltage source can be seen by this module. Which, as a result, might pose damage to the device. In addition, this module receives 8 bits of output data from the CPU host controller. Users can set the starting location of this data using the Proficy machine edition configuration tool.
Technical Specifications
| Brand | GE Fanuc Emerson |
| Series | 90-30 |
| Module Type | Programmable Logic Controller (PLC) |
| Rated Voltage | 24 Volts DC, 120/240 Volts AC (nominal) |
| Operating Voltage | 5 to 30 Volts DC - 5 to 250 Volts AC, 50/60 Hertz |
| Outputs per Module | Eight (8) Isolated Outputs |
| Isolation | 1500 Volts between Field Side and Logic Side, 500 Volts between Groups |
| Maximum Load | 4 Amperes Resistive maximum per Output, 2 Amperes Pilot Duty per Output, 20 Amperes maximum per Module for UL Installations |
| Minimum Load | 10 milliamperes |
| Maximum Inrush | 5 Amperes |
| On Response Time | 15 milliseconds, max. |
| Off Response Time | 15 milliseconds, max. |
| Internal Power Consumption | 6 milliamperes (all outputs on) from 5 Volt Bus on Backplane, 70 milliamperes (all outputs on) from Relay 24 Volt Bus on Backplane |
FAQ
Question: Does Automation Stop offer repairs on the IC693MDL930?
Answer: Yes. We offer repairs for the IC693MDL930 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693MDL930?
Answer: If you buy the IC693MDL930 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693MDL930 online?
Answer: Yes. Automation Stop sells the IC693MDL930 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693MDL930?
Answer: The IC693MDL930 is made by Emerson - GE Fanuc.
Question: What Brand is included with the Allen Bradley IC693MDL930?
Answer: The Allen Bradley IC693MDL930 has a GE Fanuc Emerson Brand.
Question: What Internal Power Consumption does the Allen Bradley-Rockwell Automation IC693MDL930 have?
Answer: The Internal Power Consumption of the Allen Bradley-Rockwell Automation IC693MDL930 is 6 milliamperes (all outputs on) from 5 Volt Bus on Backplane, 70 milliamperes (all outputs on) from Relay 24 Volt Bus on Backplane.
Question: What is the Isolation of the IC693MDL930?
Answer: The Isolation of the IC693MDL930 is 1500 Volts between Field Side and Logic Side, 500 Volts between Groups.
Question: What Maximum Inrush does the Allen Bradley Automation IC693MDL930 have?
Answer: The Maximum Inrush of the Allen Bradley Automation IC693MDL930 is 5 Amperes.
Question: What Maximum Load does the IC693MDL930 have?
Answer: The IC693MDL930 has a Maximum Load of 4 Amperes Resistive maximum per Output, 2 Amperes Pilot Duty per Output, 20 Amperes maximum per Module for UL Installations.
Question: What Minimum Load does the Allen Bradley IC693MDL930 have?
Answer: The IC693MDL930 has a Minimum Load of 10 milliamperes.
Question: What Module Type is included with the Rockwell Automation IC693MDL930?
Answer: The IC693MDL930 has a Programmable Logic Controller (PLC) Module Type.
Question: What Off Response Time does the IC693MDL930 have?
Answer: The Allen Bradley IC693MDL930 has a Off Response Time of 15 milliseconds, max..
Question: What On Response Time does the IC693MDL930 have?
Answer: The IC693MDL930 has a On Response Time of 15 milliseconds, max..
Question: What is the Operating Voltage of the IC693MDL930?
Answer: The Operating Voltage of the IC693MDL930 is 5 to 30 Volts DC - 5 to 250 Volts alternating current (AC), 50/60 Hertz.
Question: What is the Outputs per Module of the Allen Bradley IC693MDL930?
Answer: The Outputs per Module of the IC693MDL930 is Eight (8) Isolated Outputs.
Question: What is the Rated Voltage of the IC693MDL930?
Answer: The Rated Voltage of the IC693MDL930 is 24 Volts DC (direct current), 120/240 Volts alternating current (AC) (nominal).
Series information for IC693MDL930
For additional information about IC693MDL930 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693MDL930.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC693MDL930C | IC693MDL930 Series C, Rev C | Request a Quote |
| IC693MDL930E | IC693MDL930 Series E, Rev E | Request a Quote |
| IC693MDL930H | IC693MDL930 Series H, Rev H | Request a Quote |
Common Misspellings:
- IC693MDL93O
- ICG93MDL930
- ICG93MDL93O
- 1C693MDL930
- 1C693MDL93O
- 1CG93MDL930
- 1CG93MDL93O
