GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC693NIU004

✓ In Stock

IC693NIU004 Image 1 thumbnail
IC693NIU004 Image 2 thumbnail
IC693NIU004 Image 3 thumbnail
IC693NIU004 Image 4 thumbnail
IC693NIU004 Image 5 thumbnail
IC693NIU004 Image 6 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC693NIU004
Series: Series 90-30
UPC: 770072590654

Description:

The GE Fanuc Emerson IC693NIU004 is an Ethernet network interface unit which allows a 90-30 Programmable Logic Controller (PLC) system to operate remotely on an Ethernet network. The IC693NIU004 can be used as an EGD to exchange and interchange I/O and monitor data through the network. This unit contains a shield ground connection, eight (8) LED indicators to show the module status and RJ-45 ports status, three-port connectors, and an Ethernet button to restart the unit. The IC693NIU004 MAC address can be found labeled on the module outside.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$4,365.00

Available: 2

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$3,492.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a IC693NIU004? We can help!

Request a Quote

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC693NIU004 is an Ethernet network interface unit which allows a 90-30 Programmable Logic Controller (PLC) system to operate remotely on an Ethernet network. The IC693NIU004 can be employed as an EGD to exchange and interchange I/O and monitor data through the network. This unit contains a shield ground connection, eight (8) LED indicators to show the module status, and RJ-45 ports status, three-port connectors, and an Ethernet button to restart the unit. The IC693NIU004 MAC address can be found labeled on the module outside. The IC693NIU004 includes RS-232 and RJ-11 ports to link either terminal or terminal emulator to enter the station manager software on this module - to fix and troubleshoot Ethernet communications. The IC693NIU004 contains two (2) RJ-45 Ethernet ports, sensing and offering the data rate automatically either ten (10) or one hundred (100) megabits per second, either half or full-duplex and wiring arrangement.

The GE IC693NIU004 can be wired using direct, crossover, unshielded, or shielded cables. This ENIU offers a single IP address. The GE IC693NIU004 interface unit supports EGD and SRTP server protocols and its' Ethernet ports are 10/100baseT/TX ports. The IC693NIU004 has an RS-485 port on the power supply which supports both SNP and SNPX protocols. It includes both RAM and flash memory to store and save CPU firmware and user data and requires an electrical power of 7.4 Watts at a voltage rating of +5 Volts DC. The IC693NIU004 includes a battery back up to maintain the clock and store RAM data. This hardware operates at zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series Ethernet network interface unit (ENIU) for series 90-30 PLCs
Part Number IC693NIU004
Type of Memory Storage RAM and Flash
Discrete Input Points - %I 2,048 (fixed)
Discrete Output Points - %Q 2,048 (fixed)
Internal Coils - %M 4096 (fixed)
Output (Temporary) Coils - %T 256 bits (fixed)
System Status References - %S 128 bits
Register Memory - %R 9999
Analog Inputs - %AI 1268
Analog Outputs - %AQ 512
Battery Backed Clock Use of a battery is recommended, if a battery is not present the ENIU will report a low battery fault. It can be used to maintain the clock, or to save a configuration stored in RAM, The clock is used to initialize the EGD timestamp clock of the Ethernet interface.
Battery Back Up 1.2 months for internal battery / 15 months with external battery
Load Required from Power Supply 7.4 Watts of 5 VDC.
Total Baseplates per System 8 (CPU baseplate + 7 expansion and/or remote)
Built-In Serial Ports Supports RS-485 port on power supply
Protocol Support SNP and SNPX on power supply RS-485 port
Built-In Ethernet Communications Ethernet (built-in) – 10/100 base-T/TX Ethernet Switch
Number of Ethernet Ports Two, both are 10/100baseT/TX ports with auto sensing. RJ-45 connection
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC693NIU004?

Answer: Yes. We offer repairs for the IC693NIU004 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC693NIU004?

Answer: If you buy the IC693NIU004 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC693NIU004 online?

Answer: Yes. Automation Stop sells the IC693NIU004 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC693NIU004?

Answer: The IC693NIU004 is made by Emerson - GE Fanuc.


Question: What Analog Inputs - %AI does the IC693NIU004 have?

Answer: The Analog Inputs - %AI of the IC693NIU004 is 1268.


Question: What is the Analog Outputs - %AQ of the IC693NIU004?

Answer: The Analog Outputs - %AQ of the IC693NIU004 is 512.


Question: What is the Battery Back Up of the IC693NIU004?

Answer: The Battery Back Up of the IC693NIU004 is 1.2 months for internal battery / 15 months with external battery.


Question: What Battery Backed Clock is included with the IC693NIU004?

Answer: The IC693NIU004 has a Use of a battery is recommended, if a battery is not present the ENIU will report a low battery fault. It can be used to maintain the clock, or to save a configuration stored in RAM (random-access random-access memory (RAM)), The clock is used to initialize the EGD timestamp clock of the Ethernet interface. Battery Backed Clock.


Question: What Brand is included with the IC693NIU004?

Answer: The Allen Bradley IC693NIU004 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What Built-In Ethernet Communications does the IC693NIU004 have?

Answer: The Built-In Ethernet Communications of the Allen Bradley-Rockwell Automation IC693NIU004 is Ethernet (built-in) – 10/100 base-T/TX Ethernet Switch.


Question: What is the Built-In Serial Ports of the IC693NIU004?

Answer: The Allen-Bradley IC693NIU004 has a Built-In Serial Ports of Supports RS-485 port on power supply unit.


Question: What is the Discrete Input Points - %I of the IC693NIU004?

Answer: The IC693NIU004 has a Discrete Input Points - %I of 2,048 (fixed).


Question: What Discrete Output Points - %Q does the Allen Bradley IC693NIU004 have?

Answer: The Allen Bradley IC693NIU004 has a Discrete Output Points - %Q of 2,048 (fixed).


Question: What is the Internal Coils - %M of the IC693NIU004?

Answer: The Internal Coils - %M of the IC693NIU004 is 4096 (fixed).


Question: What is the Load Required from power supply of the Allen Bradley Automation IC693NIU004?

Answer: The Load Required from power supply unit of the Allen Bradley Automation IC693NIU004 is 7.4 Watts of 5 VDC..


Question: What is the Number of Ethernet Ports of the Allen Bradley IC693NIU004?

Answer: The Number of Ethernet Ports of the IC693NIU004 is Two, both are 10/100baseT/TX ports with auto sensing. RJ-45 connection.


Question: What is the Output (Temporary) Coils - %T of the Rockwell Automation IC693NIU004?

Answer: The Rockwell Automation IC693NIU004 has a Output (Temporary) Coils - %T of 256 bits (fixed).


Question: What is the part Number of the IC693NIU004?

Answer: The Allen Bradley-Rockwell Automation IC693NIU004 has a unit Number of IC693NIU004.


Question: What Protocol Support does the Allen Bradley/Rockwell Automation IC693NIU004 have?

Answer: The Allen Bradley/Rockwell Automation IC693NIU004 has a Protocol Support of SNP and SNPX on power supply unit RS-485 port.


Question: What is the Register random-access memory (RAM) - %R of the IC693NIU004?

Answer: The Register random-access memory (RAM) - %R of the IC693NIU004 is 9999.


Question: What System Status References - %S does the Allen Bradley-Rockwell Automation IC693NIU004 have?

Answer: The Allen Bradley-Rockwell Automation IC693NIU004 has a System Status References - %S of 128 bits.


Question: What is the Total Baseplates per System of the IC693NIU004?

Answer: The IC693NIU004 has a Total Baseplates per System of 8 (central processing unit (CPU) baseplate + 7 expansion and/or remote).


Question: What Type of random-access memory (RAM) Storage is included with the IC693NIU004?

Answer: The Allen-Bradley IC693NIU004 has a RAM (random-access random-access memory (RAM)) and Flash Type of random-access memory (RAM) Storage.


Series information for IC693NIU004

For additional information about IC693NIU004 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693NIU004.

Revision Part # Also Known As Availability
IC693NIU004-AA IC693NIU004 Series AA, Rev AA Request a Quote
IC693NIU004-EA IC693NIU004 Series EA, Rev EA Request a Quote
IC693NIU004-FB IC693NIU004 Series FB, Rev FB Request a Quote

Common Misspellings:

  • IC693NIU0O4
  • IC693NIUO04
  • IC693NIUOO4
  • IC693N1U004
  • IC693N1U0O4
  • IC693N1UO04
  • IC693N1UOO4
  • ICG93NIU004
  • ICG93NIU0O4
  • ICG93NIUO04
  • ICG93NIUOO4
  • ICG93N1U004
  • ICG93N1U0O4
  • ICG93N1UO04
  • ICG93N1UOO4
  • 1C693NIU004
  • 1C693NIU0O4
  • 1C693NIUO04
  • 1C693NIUOO4
  • 1C693N1U004
  • 1C693N1U0O4
  • 1C693N1UO04
  • 1C693N1UOO4
  • 1CG93NIU004
  • 1CG93NIU0O4
  • 1CG93NIUO04
  • 1CG93NIUOO4
  • 1CG93N1U004
  • 1CG93N1U0O4
  • 1CG93N1UO04
  • 1CG93N1UOO4

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP