GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC697BEM711 |
Series: | Series 90-70 |
UPC: | 799705795150 |
Description:
The GE Fanuc Emerson IC697BEM711 is a bus receiver module. This device occupies only a single slot. This unit draws a current of 800 milliamperes at a voltage of +5 volts DC.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC697BEM711 is a bus receiver module that offers the possibility to get seven (7) extra IC697 PLC racks from the main rack by employing a cable with a length of 15 meters (50 feet). This module can be easily mounted in slot 1 and occupies only a single slot. The device has two connectors. The first connector is employed to either the upstream or the CPU rack. The second one is employed for a daisy chained configuration to extra expansion racks. The IC697BEM711 draws a current of 800 milliamperes at a voltage of +5 volts DC. This unit can communicate with a data rate of 500 kilobytes per second. The bus receiver module holds the last state function of the output modules when the communication with the CPU is lost. The module offers the isolation to troubleshoot a faulty module within a rack.
The IC697BEM711 includes three LED indicators on the faceplate to show the current module status, rack activity status, and the presence of the I/O bus terminator plug. The BRM module can be removed or inserted under power. The unit can be programmed and configured through either MS-DOS or Windows. The IC697BEM711 supports a non-condensing relative humidity range from 5 percent to 95 percent and a vibration frequency range from 10 hertz to 500 hertz. The IC697BEM711 weighs approximately 340 grams (0.75 pounds) while shipping and operates at 0 to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.
Brand | GE Automation Fanuc / Emerson Automation |
Series | 90-70 |
Part Number | IC697BEM711 |
Description | Bus receiver module (BRM) |
Load requirement | 800 mA at +5 VDC |
Number of slots | 1 (single slot) |
Data rate | 500 Kbytes/sec |
PLC racks | 7 |
Communication ports | 2 connectors |
Number of LEDs | 3 |
LED indicators | OK, LAST RACK, BUS ACTIVE |
Maximum cable length | 50 feet (15 meters) |
Software configuration | MS-DOS or Windows software configuration function |
Operating temperature | 0°C to 60°C (32°F to 140°F) |
Weight | 340 g (0.75 lb.) |
Question: Does Automation Stop offer repairs on the IC697BEM711?
Answer: Yes. We offer repairs for the IC697BEM711 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC697BEM711?
Answer: If you buy the IC697BEM711 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC697BEM711 online?
Answer: Yes. Automation Stop sells the IC697BEM711 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC697BEM711?
Answer: The IC697BEM711 is made by Emerson - GE Fanuc.
Question: What Brand does the Rockwell Automation IC697BEM711 have?
Answer: The IC697BEM711 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What is the Communication ports of the IC697BEM711?
Answer: The Communication ports of the IC697BEM711 is 2 connectors.
Question: What is the Data rate of the Allen Bradley-Rockwell Automation IC697BEM711?
Answer: The IC697BEM711 has a Data rate of 500 kilobytes/sec.
Question: What Description does the IC697BEM711 have?
Answer: The Allen Bradley Automation IC697BEM711 has a Bus receiver module (BRM) Description.
Question: What LED indicators are included with the Allen Bradley IC697BEM711?
Answer: The Allen Bradley IC697BEM711 includes OK, LAST RACK, BUS ACTIVE for its LED indicators.
Question: What is the Load requirement of the IC697BEM711?
Answer: The IC697BEM711 has a Load requirement of 800 mA at +5 VDC.
Question: What Maximum cable length does the Allen Bradley/Rockwell Automation IC697BEM711 have?
Answer: The Maximum cable length of the IC697BEM711 is 50 feet (15 meters).
Question: What is the Number of LEDs of the IC697BEM711?
Answer: The Number of LEDs of the IC697BEM711 is 3.
Question: What is the Number of slots of the Allen Bradley-Rockwell Automation IC697BEM711?
Answer: The Number of slots of the Allen Bradley-Rockwell Automation IC697BEM711 is 1 (single slot).
Question: What is the Operating temperature of the IC697BEM711?
Answer: The Operating temperature of the Allen Bradley-Rockwell Automation IC697BEM711 is 0°C to 60°C (32°F to 140°F).
Question: What component Number does the Allen Bradley Automation IC697BEM711 have?
Answer: The component Number of the IC697BEM711 is IC697BEM711.
Question: What is the PLC racks of the IC697BEM711?
Answer: The PLC racks of the IC697BEM711 is 7.
Question: What Software configuration does the IC697BEM711 have?
Answer: The IC697BEM711 has a MS-DOS or Microsoft Windows software configuration function Software configuration.
Question: What Weight does the IC697BEM711 have?
Answer: The IC697BEM711 has a Weight of 340 g (0.75 lb.).
For additional information about IC697BEM711 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC697BEM711.
Revision Part # | Also Known As | Availability |
---|---|---|
IC697BEM711A | IC697BEM711 Series A, Rev A | Request a Quote |
IC697BEM711C | IC697BEM711 Series C, Rev C | Request a Quote |
IC697BEM711E | IC697BEM711 Series E, Rev E | Request a Quote |
IC697BEM711J | IC697BEM711 Series J, Rev J | Request a Quote |
IC697BEM711K | IC697BEM711 Series K, Rev K | Request a Quote |
IC697BEM711L | IC697BEM711 Series L, Rev L | Request a Quote |
IC697BEM711M | IC697BEM711 Series M, Rev M | Request a Quote |
IC697BEM711N | IC697BEM711 Series N, Rev N | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.