GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC697BEM764 |
Series: | Series 90-70 |
UPC: | 799705805958 |
Description:
Part number IC697BEM764 is a VME communication module. This module, which was designed and manufactured by GE Fanuc, belongs to the Series 90-70 product line. This device can feed 16-, 24-, and 32-bit address ranges while also supporting 8-, 16-, and 32-bit data bus ranges. This device has an operating temperature range of 0 to 60 degrees Celsius. It must be stored in an area with a temperature range of -40 to +85 degrees Celsius.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc IC697BEM764 is a communication module. GE Fanuc's Series 90-70 product line features this communication module. This unit has a bus voltage of 5 to 12 volts, and it comes with J1 and J2 backplane jumpers. The category of this module is VME DLAN, and one of its primary applications is to establish communication with microcomputers. It uses VME and Versa euro cards buses to connect with micro devices. This VME communication module offers various address options and compatibility with data bus options. For example, it can support 16, 24, and 32-bit address ranges, and at the same time, it can also provide support to 8, 16, and 32 data bus ranges. Aside from these primary module details, it is highly recommended to maintain the environmental variables for this unit to work efficiently. The recommended operating temperature for this device is 0 to 60 degrees Celsius. To operate properly, this device must be places in an area where the relative humidity range is from 5% to 95%, while also be non-condensing. This device has a vibration rating of 1 G at 40 to 1510 hertz. Additionally, this module is capable of withstanding a rated shock of up to 15 G for a duration of 11 milliseconds. This communication module is equipped with a 80C186 microprocessor to process the logic tasks. This microprocessor-enabled feature helps ensure performance stability and precise control over the communication. The module also contains an LED status indicator on the front panel that displays the operation status, data transfer status, and other function and application data. The module also has a restart push-button for resetting device functions.
Question: Does Automation Stop offer repairs on the IC697BEM764?
Answer: Yes. We offer repairs for the IC697BEM764 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC697BEM764?
Answer: If you buy the IC697BEM764 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC697BEM764 online?
Answer: Yes. Automation Stop sells the IC697BEM764 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC697BEM764?
Answer: The IC697BEM764 is made by Emerson - GE Fanuc.
For additional information about IC697BEM764 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC697BEM764.
Revision Part # | Also Known As | Availability |
---|---|---|
IC697BEM764F | IC697BEM764 Series F, Rev F | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.