GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC697CHS790

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC697CHS790
Series: Series 90-70
UPC: 799705795020

Description:

The IC697CHS790 is a rear mount for IC697 Programmable Logic controllers. The module is manufactured by GE Fanuc and is used for I/O and CPU configurations.


Key Features:

  • operates at a voltage of 5 volts dc

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$1,227.00

Available: 2

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$488.00

Available: 51

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$391.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a IC697CHS790? We can help!

Request a Quote

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The IC697CHS790 is a nine (9) slot Rear Mount Rack Module from the GE Fanuc 90-70 Series for IC697 PLCs used for CPU and I/O configurations. The standard 9-slot rack has only one power supply capacity that is located at the leftmost position. The rear mount rack IC697CHS790 mounts in a 10-inch deep enclosure where fans are not required. The dimensions of the rack are 11.15 inches in height, 19 inches in width, and 7.5 inches in depth with the width of the controller slot being 1.6 inches and the width of the supply slot being 2.4 inches. Each rack includes a feature of sensing the slot for rack type I/O for IC697 Programmable Logic Controllers. I/O modules don’t require any jumpers or switches.

Mounting of the IC697CHS790 mount rack requires enough space allowing proper cooling of the system modules. The requirements for mounting of the rack should meet the application requirements and the right rack should be used. The mounting flanges of the rack are factory installed in the side panels conveniently. The I/O modules of the IC697 interlock by using a key to avoid unintended interchange of module type for another type of module. Each module has a key that latches on mechanically to the center rail, where it will stay until the module is uninstalled. If the module is of the wrong type, it will not fit into the rack slot. When there are multiple racks in the system, each rack should be assigned a number between 0 to 7, while the CPU rack should always be numbered 'zero' (0). The number of the rack is determined by the PLC from the jumpers on the backplane of the rack.

Technical Specifications

Current Required from I/O Bus 0.5 Amperes
Number of Slots 5 or 9, plus power supply slot
Rack Identification Four (4) jumpers behind rack power supply
VME System designed to support the VME standard C.1
Weight 14.00 lbs
Dimensions 283 x 483 x 190 millimeters
Internal Power Used 20 Amperes @ 5 Volts DC
Mounting Location Rear (panel)
Module Type Standard Rack
Type Double Width
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC697CHS790?

Answer: Yes. We offer repairs for the IC697CHS790 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC697CHS790?

Answer: If you buy the IC697CHS790 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC697CHS790 online?

Answer: Yes. Automation Stop sells the IC697CHS790 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC697CHS790?

Answer: The IC697CHS790 is made by Emerson - GE Fanuc.


Question: What Current Required from input/output Bus does the Allen Bradley-Rockwell Automation IC697CHS790 have?

Answer: The Allen Bradley-Rockwell Automation IC697CHS790 has a Current Required from input/output Bus of 0.5 Amperes.


Question: What Dimensions does the Allen Bradley/Rockwell Automation IC697CHS790 have?

Answer: The Allen Bradley/Rockwell Automation IC697CHS790 has a Dimensions of 283 x 483 x 190 millimeters.


Question: What is the Internal Power Used of the IC697CHS790?

Answer: The Internal Power Used of the IC697CHS790 is 20 Amperes @ 5 Volts direct current.


Question: What Module Type is included with the Allen Bradley-Rockwell Automation IC697CHS790?

Answer: The Allen Bradley-Rockwell Automation IC697CHS790 has a Standard Rack Module Type.


Question: What Mounting Location does the Allen-Bradley IC697CHS790 have?

Answer: The IC697CHS790 has a Rear (panel component) Mounting Location.


Question: What is the Number of Slots of the IC697CHS790?

Answer: The Allen Bradley/Rockwell Automation IC697CHS790 has a Number of Slots of 5 or 9, plus power supply slot.


Question: What is the Rack Identification of the Rockwell-Automation IC697CHS790?

Answer: The Rack Identification of the IC697CHS790 is Four (4) jumpers behind rack power supply.


Question: What is the VME of the IC697CHS790?

Answer: The Allen Bradley Automation IC697CHS790 has a VME of System designed to support the VME standard C.1.


Question: What is the Weight of the IC697CHS790?

Answer: The Weight of the Allen Bradley IC697CHS790 is 14.00 lbs.


Series information for IC697CHS790

For additional information about IC697CHS790 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC697CHS790.

Revision Part # Also Known As Availability
IC697CHS790D IC697CHS790 Series D, Rev D Request a Quote
IC697CHS790E IC697CHS790 Series E, Rev E Request a Quote
IC697CHS790F IC697CHS790 Series F, Rev F Request a Quote
IC697CHS790G IC697CHS790 Series G, Rev G Request a Quote
IC697CHS790J IC697CHS790 Series J, Rev J Request a Quote

Common Misspellings:

  • IC697CHS79O
  • IC697CH5790
  • IC697CH579O
  • ICG97CHS790
  • ICG97CHS79O
  • ICG97CH5790
  • ICG97CH579O
  • 1C697CHS790
  • 1C697CHS79O
  • 1C697CH5790
  • 1C697CH579O
  • 1CG97CHS790
  • 1CG97CHS79O
  • 1CG97CH5790
  • 1CG97CH579O

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP