GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC697CPU788

✓ In Stock

IC697CPU788 Image 1 thumbnail
IC697CPU788 Image 2 thumbnail
IC697CPU788 Image 3 thumbnail
IC697CPU788 Image 4 thumbnail
IC697CPU788 Image 5 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC697CPU788
Series: Series 90-70
UPC: 799705792760

Description:

Part number IC697CPU788 is a standard CPU module that was designed for systems that require Triple Module Redundancy (TMR). This CPU module was designed and manufactured by Emerson - GE Fanuc. This module has a rated operating voltage of 5 volts DC (direct current), as well as a rated current of 1.6 amperes. This module has an available memory consisting of 512 kilobytes of RAM. This CPU module is equipped with an 80386DX processor.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$2,995.00

Available: 1

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$2,396.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a IC697CPU788? We can help!

Request a Quote

Key Features:

  • utilizes a 0 to 60 degrees celsius operating temperature

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number IC697CPU788 is a CPU module that was designed and manufactured by Emerson - GE Fanuc. This module is part of the Series 90-70 product line. It is designed to use the systems that require Triple Modular Redundancy (TRM). It operates on 5 volts DC and draws 1.6 amperes of current. This unit comes with an 80386DX processor with a clock speed of 16 megahertz. In addition, users should note that the recommended operating temperature of this CPU module is 0 to 60 degrees Celsius. Exceeding these temperature ratings might cause function or component failures. Additionally, the storage temperature should also be compliant with the set guidelines by the makers to keep it from malfunctions. This CPU module has a memory capacity that consists of 512 kilobytes of RAM, or random-access memory. Aside from that, this product should always be operated by the trained personnel to ensure enhanced safety. Additionally, this CPU module's design architecture should support various software packages necessary to control its hardware. There is no need for a software tool. Apart from these product attributes, it is usable with many programming blocks that allow TMR routines to execute. It's crucial to highlight that it won't work unless such programming blocks are present in the loaded program. Also, data and program memory are accessible with the addition of an expansion memory board with up to 512 KB of C-MOS RAM and a lithium battery. Users can also remotely control this CPU module via software, or a three-position run and stop switch.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC697CPU788?

Answer: Yes. We offer repairs for the IC697CPU788 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC697CPU788?

Answer: If you buy the IC697CPU788 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC697CPU788 online?

Answer: Yes. Automation Stop sells the IC697CPU788 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC697CPU788?

Answer: The IC697CPU788 is made by Emerson - GE Fanuc.


Series information for IC697CPU788

For additional information about IC697CPU788 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC697CPU788.

Revision Part # Also Known As Availability
IC697CPU788C IC697CPU788 Series C, Rev C Request a Quote
IC697CPU788-EA IC697CPU788 Series EA, Rev EA Request a Quote

Common Misspellings:

  • IC697CPU78B
  • IC697CPU7B8
  • IC697CPU7BB
  • ICG97CPU788
  • ICG97CPU78B
  • ICG97CPU7B8
  • ICG97CPU7BB
  • 1C697CPU788
  • 1C697CPU78B
  • 1C697CPU7B8
  • 1C697CPU7BB
  • 1CG97CPU788
  • 1CG97CPU78B
  • 1CG97CPU7B8
  • 1CG97CPU7BB

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP