GE / IP FANUC Series 90/30 In Stock
IC200UAR028
✓ In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC200UAR028 |
| Series: | Versamax Micro |
Description:
The Emerson - GE Fanuc IC200UAR028 is a VersaMax 28-point micro programmable logic controller (PLC). This device has a rated input voltage of 120 volts AC. This device has 2 relay outputs rated 10 amperes and 10 relay outputs rated at 2 amperes, as well as 16 AC inputs. The operating voltage of this device is 5 to 30 volts DC or 5 to 250 volts AC. This PLC weighs approximately 600 grams, or the equivalent of 1.32 pounds.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number IC200UAR028 is an Emerson - GE Fanuc Micro PLC that was designed with the ability to support high speed counter features, floating point function subroutines and blocks, as well as override capability and access control. Operating at a 50 to 60 hertz, plus or minus 5 percent, frequency, this device has sixteen (16) AC inputs, as well as a holdup time of 10 milliseconds at 85 to 100 volts AC and 20 milliseconds at 100 to 264 volts AC. Additionally, this device has a 2-millisecond inrush time at 40 amperes, as well as a maximum inrush current of 30 amperes at 200 volts AC and 40 amperes at 265 volts AC. Also, this PLC has a 16 volt-amperes input power supply rating. Its AC inputs have a rated load voltage of 85 to 132 volts AC at a frequency of 50 to 60 hertz, as well as a maximum input voltage of 132 volts rms. Additionally, its relay output has an operating voltage of 5 to 30 volts DC, a 15-milliampere leakage current at a maximum of 240 volts AC, a 10-milliampere minimum loading, as well as 15-millisecond maximum response time for each ON and OFF operation.
GE Fanuc’s IC200UAR028 PLC has a user program logic capacity of 9K words, 512 bits of discrete inputs/outputs, 1280 bits of discrete global references, 1024 bits of discrete internal coils, 256 bits of discrete temporary coils, 32 bits of system status references, and 256 words of system register references. This device is equipped with various LED (light emitting diode) indicators, which include PWR, Run, Ok, and point status.
FAQ
Question: Does Automation Stop offer repairs on the IC200UAR028?
Answer: Yes. We offer repairs for the IC200UAR028 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200UAR028?
Answer: If you buy the IC200UAR028 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200UAR028 online?
Answer: Yes. Automation Stop sells the IC200UAR028 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200UAR028?
Answer: The IC200UAR028 is made by Emerson - GE Fanuc.
Question: What can I expect the voltage included with the IC200UAR028 to be?
Answer: The IC200UAR028 has a voltage of 120.
Question: What voltage alternating current (VAC) does the IC200UAR028 have?
Answer: The Emerson - GE Fanuc IC200UAR028 has a voltage alternating current (VAC) of 120.
Question: What amperage does the Emerson - GE Fanuc IC200UAR028 have?
Answer: The IC200UAR028 has a amperage of 2.
Series information for IC200UAR028
For additional information about IC200UAR028 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200UAR028.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC200UAR028-BD | IC200UAR028 Series BD, Rev BD | Request a Quote |
| IC200UAR028-DK | IC200UAR028 Series DK, Rev DK | Request a Quote |
Common Misspellings:
- IC200UAR02B
- IC200UARO28
- IC200UARO2B
- IC20OUAR028
- IC20OUAR02B
- IC20OUARO28
- IC20OUARO2B
- IC2O0UAR028
- IC2O0UAR02B
- IC2O0UARO28
- IC2O0UARO2B
- IC2OOUAR028
- IC2OOUAR02B
- IC2OOUARO28
- IC2OOUARO2B
- 1C200UAR028
- 1C200UAR02B
- 1C200UARO28
- 1C200UARO2B
- 1C20OUAR028
- 1C20OUAR02B
- 1C20OUARO28
- 1C20OUARO2B
- 1C2O0UAR028
- 1C2O0UAR02B
- 1C2O0UARO28
- 1C2O0UARO2B
- 1C2OOUAR028
- 1C2OOUAR02B
- 1C2OOUARO28
- 1C2OOUARO2B
