GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC200UDD020 |
Series: | Versamax Micro |
UPC: | 32507985122 |
Description:
Item number IC200UDD020 is a micro PLC, produced by Emerson - GE Fanuc. It has 20 points, which include 12 inputs and 8 outputs. This device requires a power supply of 24 volts DC. This unit has a current consumption of 8 milliamperes per point. The input range is 19.2 to 30 volts DC with a hold-up time of 10 milliseconds. The inrush current of this device is 1 ampere at 30 volts DC and the input current is 0.2 amperes at 24 volts DC.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number IC200UDD020 is a PLC module, manufactured by Emerson - GE Fanuc. It belongs to the VersaMax Micro scalable PLCs family of products, known as providers of precise control in compact design. The unit is a 20-point PLC, 12 of which are DC inputs, 8 are outputs, of which 4 are ESCP outputs and 4 are low-current outputs. In case there is need for more I/O points, an expandable module can be used. For its operation, the PLC uses a power supply of 24 volts DC and consumes 8 milliamperes of current for each point. The PLC power supply input range is from 19.2 to 30 volts DC, and when used at 19.2 volts DC, it has a hold up time of 10 milliseconds. The module has an inrush current at 30 volts DC equal to 1 ampere, and the input current at 24 volts DC is 0.2 amperes.
The device's main application is for electronic circuit protection, and it serves this purpose by its low current outputs. There are 2 separate programming instructions supported, which include the ladder diagram and the instruction list types. The module has a non-volatile memory incorporated in which the user programs and system firmware are saved. The unit's inputs feature discrete input filtering and R/C simple hardware filtering. By configuring its high-speed outputs, the PLC can provide simple control functions for motion like jogging and blended move, stop, and home functions. The module can be installed in two alternatives: either on 35 millimeters DIN Rail or on a metal panel.
Question: Does Automation Stop offer repairs on the IC200UDD020?
Answer: Yes. We offer repairs for the IC200UDD020 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200UDD020?
Answer: If you buy the IC200UDD020 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200UDD020 online?
Answer: Yes. Automation Stop sells the IC200UDD020 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200UDD020?
Answer: The IC200UDD020 is made by Emerson - GE Fanuc.
For additional information about IC200UDD020 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200UDD020.
Revision Part # | Also Known As | Availability |
---|---|---|
IC200UDD020-BC | IC200UDD020 Series BC, Rev BC | Request a Quote |
IC200UDD020-CF | IC200UDD020 Series CF, Rev CF | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.