GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC200UDD110

✓ In Stock

IC200UDD110 Image 1 thumbnail
IC200UDD110 Image 2 thumbnail
IC200UDD110 Image 3 thumbnail
IC200UDD110 Image 4 thumbnail
IC200UDD110 Image 5 thumbnail
IC200UDD110 Image 6 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC200UDD110
Series: Versamax Micro
UPC: 137799322898

Description:

The IC200UDD110 by GE Fanuc is a VersaMax Micro PLC. It has 16 24-Volt DC positive logic inputs in four groups of four and 12 transistor outputs at 24 Volts DC. The IC200UDD110 has a DC power range of 19.2 to 30 Volts DC and a rated input voltage of 24 Volts DC.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$392.00

Available: 3

What is Refurbished

Your order will ship by . Need it faster?

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The IC200UDD110 is a VersaMax Micro PLC by GE Fanuc. It has 16 24-Volt DC positive logic inputs in four groups of four and 12 transistor outputs at 24 Volts DC. The outputs for this hardware are grouped into two groups with separated incoming supply. Each group of outputs contains four outputs with a maximum load of 0.5 Amperes and 2 outputs with a maximum load of 1 Ampere. The IC200UDD110 has a 24 Volt DC output power supply of 200 milliamperes maximum (for input circuits and user devices). DC power specifications for the IC200UDD110 include a range of 19.2 Volts DC to 30 Volts DC and a hold-up of 10 milliseconds at 19.2 Volts DC; inrush current is 1 Ampere maximum at 30 Volts DC. Inrush time for the IC200UDD110 is 10 milliseconds for 1 Ampere, while input current is 0.20 Amperes typical at 24 Volts DC. Input power supply rating is 5 Watts.

DC input specifications for the IC200UDD110 include a rated input voltage of 24 Volts DC and an input voltage range of 0 to 30 Volts DC; input current is 7.5 milliamperes typical and response time is 0.5 to 20 milliseconds configurable as regular input. The IC200UDD110 has an isolation voltage of 1500 Volts RMS field side to logic side, 500 Volts RMS between groups. Output specifications for the IC200UDD110 include a voltage range of 12 Volts DC/24 Volts DC. The IC200UDD110 has an output voltage drop of 0.3 Volts maximum. With regard to fusing outputs, outputs should be fused externally. If this is not done, a load short could damage the module output transistor; this is not user replaceable. The IC200UDD110 has an approximate weight of 460 grams, or 1.01 pounds.

Technical Specifications

Brand: GE Fanuc
Inputs: 16 24-Volt Positive Logic Inputs (4 Groups of 4)
Outputs: 12, Transistor, 24 Volts DC
Output Power Supply (24 Volts DC): 200 Milliamperes, Maximum
DC Power Range: 19.2 Volts DC to 30 Volts DC
Power Hold-Up: 10 Milliseconds at 19.2 Volts DC
Power Inrush Current: 1 Ampere Maximum at 30 Volts DC
Power Inrush Time: 10 Millseconds for 1 Ampere
Power Input Current: 0.20 Amperes Typical at 24 Volts DC
Input Power Supply Rating: 5 Watts
Rated Input Voltage: 24 Volts DC
Input Voltage Range: 0 to 30 Volts DC
Input Current: 7.5 Milliamperes Typical
Isolation Voltage: 1500 Volts RMS (Field to Logic), 500 Volts RMS (Between Groups)
Output Voltage Range: 12 Volts DC/24 Volts DC
Output Voltage Drop: 0.3 Volts Maximum
Weight (Approx.): 460 Grams (1.01 Pounds)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC200UDD110?

Answer: Yes. We offer repairs for the IC200UDD110 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC200UDD110?

Answer: If you buy the IC200UDD110 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC200UDD110 online?

Answer: Yes. Automation Stop sells the IC200UDD110 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC200UDD110?

Answer: The IC200UDD110 is made by Emerson - GE Fanuc.


Question: What Brand: is included with the Allen-Bradley IC200UDD110?

Answer: The Allen-Bradley IC200UDD110 has a GE Fanuc Brand:.


Question: What direct current Power Range: does the IC200UDD110 have?

Answer: The IC200UDD110 has a direct current Power Range: of 19.2 Volts direct current to 30 Volts direct current.


Question: What Input Current: does the Allen-Bradley IC200UDD110 have?

Answer: The Input Current: of the Allen-Bradley IC200UDD110 is 7.5 Milliamperes Typical.


Question: What is the Input power supply component Rating: of the IC200UDD110?

Answer: The Allen Bradley-Rockwell Automation IC200UDD110 has a Input power supply Rating: of 5 Watts.


Question: What is the Input Voltage Range: of the Allen Bradley IC200UDD110?

Answer: The Input Voltage Range: of the IC200UDD110 is 0 to 30 Volts direct current (DC).


Question: What is the Inputs: of the IC200UDD110?

Answer: The Allen Bradley IC200UDD110 has a Inputs: of 16 24-Volt Positive Logic Inputs (4 Groups of 4).


Question: What Isolation Voltage: does the IC200UDD110 have?

Answer: The IC200UDD110 has a Isolation Voltage: of 1500 Volts RMS (Field to Logic), 500 Volts RMS (Between Groups).


Question: What is the Output power supply unit (24 Volts direct current (DC)): of the IC200UDD110?

Answer: The IC200UDD110 has a Output power supply (24 Volts DC): of 200 Milliamperes, Maximum.


Question: What is the Output Voltage Drop: of the IC200UDD110?

Answer: The IC200UDD110 has a Output Voltage Drop: of 0.3 Volts Maximum.


Question: What is the Output Voltage Range: of the Rockwell-Automation IC200UDD110?

Answer: The Rockwell-Automation IC200UDD110 has a Output Voltage Range: of 12 Volts direct current/24 Volts direct current.


Question: What is the Outputs: of the IC200UDD110?

Answer: The IC200UDD110 has a Outputs: of 12, Transistor, 24 Volts DC (direct current).


Question: What Power Hold-Up: does the Rockwell Automation IC200UDD110 have?

Answer: The IC200UDD110 has a Power Hold-Up: of 10 Milliseconds at 19.2 Volts DC.


Question: What Power Input Current: does the IC200UDD110 have?

Answer: The IC200UDD110 has a Power Input Current: of 0.20 Amperes Typical at 24 Volts direct current (DC).


Question: What is the Power Inrush Current: of the IC200UDD110?

Answer: The Power Inrush Current: of the IC200UDD110 is 1 Ampere Maximum at 30 Volts DC (direct current).


Question: What is the Power Inrush Time: of the IC200UDD110?

Answer: The Power Inrush Time: of the Rockwell Automation IC200UDD110 is 10 Millseconds for 1 Ampere.


Question: What is the Rated Input Voltage: of the Allen-Bradley IC200UDD110?

Answer: The IC200UDD110 has a Rated Input Voltage: of 24 Volts DC.


Question: What is the Weight (Approx.): of the Allen-Bradley IC200UDD110?

Answer: The Allen-Bradley IC200UDD110 has a Weight (Approx.): of 460 Grams (1.01 Pounds).


Series information for IC200UDD110

For additional information about IC200UDD110 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200UDD110.

Revision Part # Also Known As Availability
IC200UDD110-BD IC200UDD110 Series BD, Rev BD Request a Quote
IC200UDD110-CJ IC200UDD110 Series CJ, Rev CJ Request a Quote
IC200UDD110-DJ IC200UDD110 Series DJ, Rev DJ Request a Quote
IC200UDD110-DK IC200UDD110 Series DK, Rev DK Request a Quote

Common Misspellings:

  • IC200UDD11O
  • IC200UDD1I0
  • IC200UDD1IO
  • IC200UDDI10
  • IC200UDDI1O
  • IC200UDDII0
  • IC200UDDIIO
  • IC20OUDD110
  • IC20OUDD11O
  • IC20OUDD1I0
  • IC20OUDD1IO
  • IC20OUDDI10
  • IC20OUDDI1O
  • IC20OUDDII0
  • IC20OUDDIIO
  • IC2O0UDD110
  • IC2O0UDD11O
  • IC2O0UDD1I0
  • IC2O0UDD1IO
  • IC2O0UDDI10
  • IC2O0UDDI1O
  • IC2O0UDDII0
  • IC2O0UDDIIO
  • IC2OOUDD110
  • IC2OOUDD11O
  • IC2OOUDD1I0
  • IC2OOUDD1IO
  • IC2OOUDDI10
  • IC2OOUDDI1O
  • IC2OOUDDII0
  • IC2OOUDDIIO
  • 1C200UDD110
  • 1C200UDD11O
  • 1C200UDD1I0
  • 1C200UDD1IO
  • 1C200UDDI10
  • 1C200UDDI1O
  • 1C200UDDII0
  • 1C200UDDIIO
  • 1C20OUDD110
  • 1C20OUDD11O
  • 1C20OUDD1I0
  • 1C20OUDD1IO
  • 1C20OUDDI10
  • 1C20OUDDI1O
  • 1C20OUDDII0
  • 1C20OUDDIIO
  • 1C2O0UDD110
  • 1C2O0UDD11O
  • 1C2O0UDD1I0
  • 1C2O0UDD1IO
  • 1C2O0UDDI10
  • 1C2O0UDDI1O
  • 1C2O0UDDII0
  • 1C2O0UDDIIO
  • 1C2OOUDD110
  • 1C2OOUDD11O
  • 1C2OOUDD1I0
  • 1C2OOUDD1IO
  • 1C2OOUDDI10
  • 1C2OOUDDI1O
  • 1C2OOUDDII0
  • 1C2OOUDDIIO

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP