GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC200UDD120 |
Series: | Versamax Micro |
UPC: | 799705798267 |
Description:
Designed and produced by Emerson - GE Fanuc, part number IC200UDD120 is a Versamax Micro PLC. This device has 28 points. These points consist of 16 24-volt DC inputs and 12 24-volt DC outputs. This device can support up to 8 slave devices per network. This device has a rated input voltage of 24 volts DC with an input voltage range of 0 to 30 volts DC. This Micro PLC has an approximate weight of 460 grams, or 1.01 pounds.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number IC200UDD120 was designed and manufactured by Emerson - GE Fanuc. This device is a Versamax Micro PLC (programmable logic controller) with twenty-eight (28) points. These points are divided into sixteen (16) 24 volts direct current (DC) inputs and twelve (12) 24 volts direct current (DC) outputs. The module supports up to eight (8) slave devices per network and has a lithium battery that lasts around four (4) months. Aside from that, in order to operate, this device requires twenty-four (24) volts of direct current input power with a voltage range of 19.2 to 30 volts of direct current, an input current of 0.2 amperes, and a five (5)-watt rated input power source. This GE Fanuc unit also comes with status indicator LEDs (light emitting diodes) that help operators by giving them visual proof of the device's working state. In addition to that, this programmable logic controller includes two communication ports and flash memory for system firmware and program storage. Furthermore, this device also includes RAM (random-access memory) for capacitor backup along with a lithium battery for real-time clock backup. Additionally, the replacement terminal assembly is protected by the hinged lid and its high-speed counter input has a ten (10) kilo-hertz peak counter frequency and sixteen (16) bits of counter registers. Lastly, this module by GE Fanuc has a compact and modular build which helps it by giving long-term stability in a variety of applications. This Versamax Micro PLC has an operating temperature that should range from 0 to 55 degrees Celsius.
Question: Does Automation Stop offer repairs on the IC200UDD120?
Answer: Yes. We offer repairs for the IC200UDD120 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200UDD120?
Answer: If you buy the IC200UDD120 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200UDD120 online?
Answer: Yes. Automation Stop sells the IC200UDD120 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200UDD120?
Answer: The IC200UDD120 is made by Emerson - GE Fanuc.
For additional information about IC200UDD120 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200UDD120.
Revision Part # | Also Known As | Availability |
---|---|---|
IC200UDD120-DJ | IC200UDD120 Series DJ, Rev DJ | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.