GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC200UDR120 |
Series: | Versamax Micro |
Description:
Part number IC200UDR120 is a Micro PLC unit produced by GE Fanuc Emerson. It is a 20 point I/O, twelve (12) 24-volt DC inputs with eight (8) relay outputs rated at 2 milliamperes each. It can acquire up to 4 more expansion I/O units. This model has two communication ports, used as master, slave or Ethernet connection. The device possesses RAM memory for data storage of up to 32 kilobytes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number IC200UDR120 is a Micro PLC module, manufactured by GE Fanuc Emerson. It is part of the VersaMax Micro family line of PLCs. It is a 20 point I/O PLC with points of discrete, non-analog type. This device is equipped with twelve (12) 24-volt DC inputs, as well as eight (8) relay outputs. Each relay output is rated at 2 amperes. The unit operates with power supply of range 100 to 240 volts AC. The PLC leakage current is 15 milliamperes when charged at 240 volts AC. The device has mechanical contacts, and their lifetime is evaluated at 20 million operations. Up to 20 seconds, there can be allowed inrush of 9.4 amperes, and the normally minimal load should not drop below 10 amperes. The maximum counter speed of the unit is 100 kilohertz (32 bit).
the GE Fanuc IC200UDR120's main three applications are to serve as PLC controller, to be used as a sub-station of I/O, and/or to be part of a larger system of several PLCs. This automation device also is used with a variety of inputs, such as push buttons, limit switches, and proximity switches. In case there is application with process control, the PLC can operate with a floating-point mat and PID. The unit has two communication ports, which include one RS-232 that can be applied as SNP slave, Modbus RTU or alternatively serial I/O commands. The second port is typically used as SNP master, Modbus master, or Ethernet LAN connection. It can accept 4 I/O expansion units. It has a battery backed RAM that has the capability to storage up to 32 kilobytes data. It has a real time clock and can register values on an internal flash.
Question: Does Automation Stop offer repairs on the IC200UDR120?
Answer: Yes. We offer repairs for the IC200UDR120 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200UDR120?
Answer: If you buy the IC200UDR120 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200UDR120 online?
Answer: Yes. Automation Stop sells the IC200UDR120 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200UDR120?
Answer: The IC200UDR120 is made by Emerson - GE Fanuc.
Question: What can I expect the VAC (voltage alternating current) included with the IC200UDR120 to be?
Answer: The IC200UDR120 has a voltage alternating current (VAC) of 240.
For additional information about IC200UDR120 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200UDR120.
Revision Part # | Also Known As | Availability |
---|---|---|
IC200UDR120-BC | IC200UDR120 Series BC, Rev BC | Request a Quote |
IC200UDR120-DF | IC200UDR120 Series DF, Rev DF | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.