GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC200UEX616 |
Series: | Versamax Micro |
UPC: | 445979572286 |
Description:
The IC200UEX616 is a 6 Analog Expansion unit for VersaMax Micro PLC devices. The six analog channels of this device are divided into four (4) analog input channels and two (2) analog output channels. The rated power supply source is 12 volts DC. The resolution of the input and output channels is 12-bit. The input power supply rating is 2.25 watts, and the voltage range of this device is 9.6 volts DC to 15 volts DC.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number IC200UEX616, which was designed and manufactured by Emerson - GE Fanuc, is a VersaMax Micro PLC analog expansion unit. This unit has a rated power supply of 12 volts direct current (DC) This device is equipped with a total of six (6) analog channels, in which four (4) of these channels are analog in while the remaining two (2) are analog out. The analog input ranges of this device include: 0 to 10 volts with a maximum of 10.23 volts, -10 volts to +10 volts with a minimum of 10.23 volts and a maximum of +10.23 volts, 0 to 20 milliamperes with a maximum of 20.47 milliamperes, and 4 to 20 milliamperes with a maximum of 20.47 milliamperes. The analog output ranges of this device include: 0 to 10 volts with a maximum of 10.24 volts, 0 to 20 milliamperes with a maximum of 20.47 milliamperes, and 4 to 20 milliamperes with a maximum of 20.5 milliamperes. This device has a resolution of 12 bits for both analog inputs and analog outputs.
The Emerson - GE Fanuc IC200UEX616 has a voltage range of 9.6 volts DC to 15 volts DC with a hold-up time of 10.1 milliseconds at the voltage of 9.6 volts. This device has an in-rush time of 1 millisecond at 15 volts. The in-rush current is 0.9 amperes at 15 volts, and the input current at this voltage is 0.15 amperes. The input power supply rating of this product is 2.25 watts. The physical dimensions of this device measure 90 mm x 150 mm x 90 mm (height x width x depth).
Question: Does Automation Stop offer repairs on the IC200UEX616?
Answer: Yes. We offer repairs for the IC200UEX616 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200UEX616?
Answer: If you buy the IC200UEX616 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200UEX616 online?
Answer: Yes. Automation Stop sells the IC200UEX616 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200UEX616?
Answer: The IC200UEX616 is made by Emerson - GE Fanuc.
For additional information about IC200UEX616 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200UEX616.
Revision Part # | Also Known As | Availability |
---|---|---|
IC200UEX616B | IC200UEX616 Series B, Rev B | Request a Quote |
IC200UEX616D | IC200UEX616 Series D, Rev D | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.