GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC200UEX636 |
Series: | Versamax Micro |
UPC: | 971986250843 |
Description:
Product number IC200UEX636 is a 6-channel analog expansion module. This module was designed and manufactured by Emerson - GE Fanuc. It belongs to the VersaMax Micro PLC series of products. This module is equipped with 4 analog inputs, as well as 2 analog outputs. The power voltage of this device is 100/110/120/200/210/220 volts AC at 50/60 hertz. The input power supply rating is 15 volt-amperes. It has physical dimensions that measure 95 mm x 90 mm x 76 mm.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number IC200UEX636 is a VersaMax series 6-channel analog expansion module. The module is designed as an I/O expansion accessory to the VersaMax Scalable Micro PLCs by Emerson - GE Fanuc. This 6-channel analog expansion module contains 4 analog inputs and 2 analog outputs. The module has 64 built-in I/O points that are expandable to 170 I/O points. The module requires a power supply rated at 120 volts AC/240 volts AC (0 to 10 volts DC, +/- 10 volts DC). This device has an input current rating of 0.06 amperes at 264 volts. The hold-up time of this analog expansion module is rated at 223 milliseconds at a voltage of 85 volts. The inrush current/time rating of this device is 4 amperes/5 milliseconds at 264 volts. This analog expansion module has an current rating specified at 200 milliamperes, 0 to 40 milliamperes, or 0 to 20 milliamperes. This GE Fanuc analog expansion module’s power consumption is rated at 15 volt-amperes.
Additional features and benefits of the IC200UEX636 expansion module include a modular design, scalable architecture, enhanced flexibility, increased memory capacity, a user-friendly memory module, and fast cycle times. This module can be connected to a controller via its memory module to update existing program configurations. It also allows online programming capability to conduct updates while the module is running. The IC200UEX636 analog expansion module has physical dimensions that measure 95 millimeters x 90 millimeters x 76 millimeters (width x depth x height). This GE Fanuc device has an approximate weight of 2 pounds.
Question: Does Automation Stop offer repairs on the IC200UEX636?
Answer: Yes. We offer repairs for the IC200UEX636 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200UEX636?
Answer: If you buy the IC200UEX636 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200UEX636 online?
Answer: Yes. Automation Stop sells the IC200UEX636 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200UEX636?
Answer: The IC200UEX636 is made by Emerson - GE Fanuc.
Question: What VAC (voltage alternating current) is included with the Emerson - GE Fanuc IC200UEX636?
Answer: The IC200UEX636 has a voltage alternating current (VAC) of 240.
For additional information about IC200UEX636 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200UEX636.
Revision Part # | Also Known As | Availability |
---|---|---|
IC200UEX636C | IC200UEX636 Series C, Rev C | Request a Quote |
IC200UEX636F | IC200UEX636 Series F, Rev F | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.