GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC200USB002 |
Series: | Versamax Micro |
UPC: | 112199899683 |
Description:
Part number IC200USB002 is an extra port option module for VersaMax Micro Programmable Logic Controllers (PLCs). This module was designed and produced by Emerson - GE Fanuc. This module has 64 input / output (I/O) points and 2 analog inputs. It has an input voltage range of 0 to 10 volts, with 10.24 volts being the maximum input voltage. The two (2) analog inputs of this module have a 10-bit resolution.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Emerson - GE Fanuc designed and manufactured the IC200USB002. The VersaMax Micro Programmable Logic Controller, or PLC, has a number of built-in capabilities, such as up to sixty four (64) Input or Output points which are expandable up to one hundred and seventy (170) Input or Output points, rapid-cycle rates, a rich instruction set, and vast memory which expands programming possibilities. This module is an Extra Port Option Module that expands the Micro Programmable Logic Controllers' serial RS-422 or -488 communication capabilities beyond the two (2) analog input points that they presently have. Aside from that, this option board by GE Fanuc is mounted on the front of the Micro 20/40/64 Programmable Logic Controller and consumes a peak of two hundred (200) milliamperes from the Micro Programmable Logic Controller backplane. The IC200USB002 Extra Port Option Module has two (2) analog input points with a ten (10) bit resolution, as well as a zero (0) volts direct current (DC) to ten (10) volts direct current (DC) input range. Furthermore, a straight Type B flash memory module connection, as well as a power button and analog input terminals, which are Channel one (1) and Channel (2), and an RS-422 or 485 connector port are located on the rear of this module. Aside from that, it should also be noted that the VersaMax Programmable logic Controller systems are utilized for offering low-cost control solutions to applications such as relay replacement, packing machines, and dispensing machine applications due to their compact and modular architecture.
Question: Does Automation Stop offer repairs on the IC200USB002?
Answer: Yes. We offer repairs for the IC200USB002 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200USB002?
Answer: If you buy the IC200USB002 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200USB002 online?
Answer: Yes. Automation Stop sells the IC200USB002 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200USB002?
Answer: The IC200USB002 is made by Emerson - GE Fanuc.
For additional information about IC200USB002 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200USB002.
Revision Part # | Also Known As | Availability |
---|---|---|
IC200USB002B | IC200USB002 Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.