GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC200ALG266 |
| Series: | Versamax |
| UPC: | 265643079459 |
Description:
The GE Fanuc IC200ALG266 is an input module that is a TUV-certified device manufactured for the Versamax series. It consists of 15 channels and contains a voltage range of 15 bits. The module connects 15 single-ended current inputs to a common return. This module supports SIL2 applications. If three consecutive instances occur, scanning will come to a halt, the OK LED will be switched out, and an Internal Hardware error will be recorded. The module must be power cycled to resolve this issue.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC200ALG266 input module is a certified Versamax module made by GE Fanuc. This module was created to act as a bridge between various input devices. The module is powered by the backplane power supply, which eliminates the need for an additional power supply. It's worth noting, though, that power for the user's transceivers must come from somewhere else. The module's NIU or CPU facilitates brilliant processing to enable analog input data (15 words). This can later be used for this module's intelligent processing. The input sense resistors are protected by an active circuit in the IC200ALG266. If the input is inadvertently connected to +24 volts of power, the module limits the input power supply to 40 milliamperes to avoid harm from the power surge. Additional safety for the sense resistors is also embedded in this module.
When the module is switched off, any external transmitters connected to it that recognize open-wire faults would see the open input loop as an open wire issue, and also any external receivers connected in series with the module would not acquire a legitimate signal. When backplane power is provided, self-generated field power is operating successfully, the device has been configured, and/or it's been recognized on the backplane, the module's LED Indicator becomes green.
Moreover, when in 4-20 mA mode, the IC200ALG266 detects a lack of internal power fault for field-side circuits as well as an open wire fault for each channel. When an A/D conversion failure is detected, the module notifies an Internal Hardware fault. By presenting a known stimulus to the A/D conversion channel and checking the predicted output, the module detects this issue.
FAQ
Question: Does Automation Stop offer repairs on the IC200ALG266?
Answer: Yes. We offer repairs for the IC200ALG266 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200ALG266?
Answer: If you buy the IC200ALG266 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200ALG266 online?
Answer: Yes. Automation Stop sells the IC200ALG266 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200ALG266?
Answer: The IC200ALG266 is made by Emerson - GE Fanuc.
Series information for IC200ALG266
For additional information about IC200ALG266 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200ALG266.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC200ALG266F | IC200ALG266 Series F, Rev F | Request a Quote |
| IC200ALG266H | IC200ALG266 Series H, Rev H | Request a Quote |
Common Misspellings:
- IC200ALG26G
- IC200ALG2G6
- IC200ALG2GG
- IC200AL6266
- IC200AL626G
- IC200AL62G6
- IC200AL62GG
- IC20OALG266
- IC20OALG26G
- IC20OALG2G6
- IC20OALG2GG
- IC20OAL6266
- IC20OAL626G
- IC20OAL62G6
- IC20OAL62GG
- IC2O0ALG266
- IC2O0ALG26G
- IC2O0ALG2G6
- IC2O0ALG2GG
- IC2O0AL6266
- IC2O0AL626G
- IC2O0AL62G6
- IC2O0AL62GG
- IC2OOALG266
- IC2OOALG26G
- IC2OOALG2G6
- IC2OOALG2GG
- IC2OOAL6266
- IC2OOAL626G
- IC2OOAL62G6
- IC2OOAL62GG
- 1C200ALG266
- 1C200ALG26G
- 1C200ALG2G6
- 1C200ALG2GG
- 1C200AL6266
- 1C200AL626G
- 1C200AL62G6
- 1C200AL62GG
- 1C20OALG266
- 1C20OALG26G
- 1C20OALG2G6
- 1C20OALG2GG
- 1C20OAL6266
- 1C20OAL626G
- 1C20OAL62G6
- 1C20OAL62GG
- 1C2O0ALG266
- 1C2O0ALG26G
- 1C2O0ALG2G6
- 1C2O0ALG2GG
- 1C2O0AL6266
- 1C2O0AL626G
- 1C2O0AL62G6
- 1C2O0AL62GG
- 1C2OOALG266
- 1C2OOALG26G
- 1C2OOALG2G6
- 1C2OOALG2GG
- 1C2OOAL6266
- 1C2OOAL626G
- 1C2OOAL62G6
- 1C2OOAL62GG
