GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC200MDD844 |
| Series: | Versamax |
| UPC: | 647544251866 |
Description:
The GE Fanuc Emerson IC200MDD844 is an input/output module that includes sixteen (16) inputs and outputs. The module outputs are grouped into two (2) groups of eight (8) outputs. The IC200MDD844 weighs approximately 150 grams (0.33 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC200MDD844 is an input/output module that includes sixteen (16) inputs and outputs. The module inputs are grouped into a single group of sixteen (16) inputs that support a voltage from 0 volts DC to 30 volts DC. The module outputs are grouped into two (2) groups of eight (8) outputs that deliver a voltage from 10.2 volts DC to 30 volts DC. These inputs and outputs have green LED indicators to show the on/off status of points. The inputs are positive logic and the outputs are either positive or sourcing type points. This module employs the backplane optical isolation offered by optocouplers to provide electrical isolation of 250 volts AC continuously between logic and field sides and 1500 volts AC for one minute.
The IC200MDD844 can be easily mounted in any input or output slot of the baseplate. The device provides an on response time of 0.5 milliseconds and an off response time of 1 millisecond. The device draws a current of 70 milliamperes at a backplane voltage of 5 volts DC. The module outputs deliver a current of 0.5 amperes per point. The IC200MDD844 has an output voltage drop of 0.3 volts. The module intelligent processing is performed and achieved by either the NIU or the CPU. This VersaMax module supports an inrush current of 2 amperes for 100 milliseconds. The IC200MDD844 weighs approximately 150 grams (0.33 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | VersaMax |
| Part Number | IC200MDD844 |
| Description | Discrete mixed Input/Output module |
| Number of I/O points | 8 Inputs / 16 Outputs |
| I/O groups | 1 group of 16 outputs / 2 groups of 8 inputs |
| Input voltage | 0 to +30VDC, +24VDC nominal |
| Output voltage range | +10.2 to +30VDC, +12/24VDC nominal |
| Isolation | 1500 volts / 250 volts AC |
| Output current | 0.5 Amp at 30VDC maximum (resistive) |
| Output voltage drop | 0.3 volts |
| Output leakage current | 0.5mA at 30VDC maximum |
| Inrush current | 2.0 Amps maximum for 100 ms |
| Internal power consumption | 70 mA maximum from 5 volt bus on backplane |
| Weight | 150 g (0.33 lb) |
FAQ
Question: Does Automation Stop offer repairs on the IC200MDD844?
Answer: Yes. We offer repairs for the IC200MDD844 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200MDD844?
Answer: If you buy the IC200MDD844 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200MDD844 online?
Answer: Yes. Automation Stop sells the IC200MDD844 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200MDD844?
Answer: The IC200MDD844 is made by Emerson - GE Fanuc.
Question: What Brand is included with the Allen-Bradley IC200MDD844?
Answer: The Allen-Bradley IC200MDD844 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What Description does the IC200MDD844 have?
Answer: The IC200MDD844 has a Discrete mixed Input/Output module Description.
Question: What is the input/output groups of the IC200MDD844?
Answer: The IC200MDD844 has a input/output groups of 1 group of 16 outputs / 2 groups of 8 inputs.
Question: What is the Input voltage of the Allen Bradley/Rockwell Automation IC200MDD844?
Answer: The IC200MDD844 has a Input voltage of 0 to +30VDC, +24VDC nominal.
Question: What Inrush current does the Rockwell-Automation IC200MDD844 have?
Answer: The IC200MDD844 has a Inrush current of 2.0 amperes maximum for 100 ms.
Question: What Internal power consumption does the IC200MDD844 have?
Answer: The Allen Bradley/Rockwell Automation IC200MDD844 has a Internal power consumption of 70 mA maximum from 5 volt bus on backplane.
Question: What is the Isolation of the Allen Bradley Automation IC200MDD844?
Answer: The IC200MDD844 has a Isolation of 1500 volts / 250 volts AC (alternating current).
Question: What is the Number of input/output points of the IC200MDD844?
Answer: The Number of input/output points of the IC200MDD844 is 8 Inputs / 16 Outputs.
Question: What is the Output current of the IC200MDD844?
Answer: The IC200MDD844 has a Output current of 0.5 Amp at 30VDC maximum (resistive).
Question: What is the Output leakage current of the Allen Bradley IC200MDD844?
Answer: The IC200MDD844 has a Output leakage current of 0.5mA at 30VDC maximum.
Question: What Output voltage drop does the Allen Bradley/Rockwell Automation IC200MDD844 have?
Answer: The IC200MDD844 has a Output voltage drop of 0.3 volts.
Question: What Output voltage range does the IC200MDD844 have?
Answer: The Output voltage range of the IC200MDD844 is +10.2 to +30VDC, +12/24VDC nominal.
Question: What component Number does the IC200MDD844 have?
Answer: The unit Number of the Allen-Bradley IC200MDD844 is IC200MDD844.
Question: What is the Weight of the IC200MDD844?
Answer: The Weight of the Allen Bradley/Rockwell Automation IC200MDD844 is 150 g (0.33 lb).
Series information for IC200MDD844
For additional information about IC200MDD844 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200MDD844.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC200MDD844B | IC200MDD844 Series B, Rev B | Request a Quote |
| IC200MDD844D | IC200MDD844 Series D, Rev D | Request a Quote |
| IC200MDD844E | IC200MDD844 Series E, Rev E | Request a Quote |
| IC200MDD844F | IC200MDD844 Series F, Rev F | Request a Quote |
| IC200MDD844G | IC200MDD844 Series G, Rev G | Request a Quote |
| IC200MDD844H | IC200MDD844 Series H, Rev H | Request a Quote |
| IC200MDD844K | IC200MDD844 Series K, Rev K | Request a Quote |
| IC200MDD844M | IC200MDD844 Series M, Rev M | Request a Quote |
Common Misspellings:
- IC200MDDB44
- IC20OMDD844
- IC20OMDDB44
- IC2O0MDD844
- IC2O0MDDB44
- IC2OOMDD844
- IC2OOMDDB44
- 1C200MDD844
- 1C200MDDB44
- 1C20OMDD844
- 1C20OMDDB44
- 1C2O0MDD844
- 1C2O0MDDB44
- 1C2OOMDD844
- 1C2OOMDDB44
