GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC200MDL143 |
Series: | Versamax |
UPC: | 92687722825 |
Description:
The IC200MDL143 is a Ge Fanuc input module for smart signal processing. It belongs to the Versa Max series that presents discrete I/O modules. This module has an operating voltage of 120v AC. It has eight discrete inputs. And it has a current backplane rating of 50 mA. It also has built-in power and channel isolation functionality. Aside from that, it comes with eight LEDs with specific numbers and features.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC200MDL143 discrete input module is from Versa Max's series that feature digital input modules for intelligent signal processing among I/O modules. Ge Fanuc is the developer of this module. In addition, the Versa max I/O system is compatible with this unit. It features a 120v ac input rating and a 0 to 132v AC voltage range. This input module receives signals from other input devices delivers them to the (CPU) or (NIU) for smart signal processing. In addition, this unit also has a flexible, lightweight design allowing for operational efficiencies, versatility, and reduced operating costs.
Besides that, it also features individually isolated inputs with 60 minutes of 1500v AC point-to-point separation and 1 minute of 1500v ac ground separation. Also, this digital input module has a five-milliamp minimum on-state current rating and a one-cycle max on-state reaction time. Apart from these attributes, this module also enables users to keep track of the operation. In total, it comes with eight LEDs that are all separately numbered. A green led is used for the backplane operation. Apart from that, this discrete input module comes with an inbuilt power supply unit and is also capable of channel isolation functionality. The maximum response time for these channels isolation is one cycle. This unit offers a portable and lightweight design developed using modern techniques. Hence, it is user-friendly and can also provide all the complex I/O capabilities for its compatible devices such as sensors and others. Overall, this input module offers a smart way to conduct signal processing.
Question: Does Automation Stop offer repairs on the IC200MDL143?
Answer: Yes. We offer repairs for the IC200MDL143 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200MDL143?
Answer: If you buy the IC200MDL143 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200MDL143 online?
Answer: Yes. Automation Stop sells the IC200MDL143 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200MDL143?
Answer: The IC200MDL143 is made by Emerson - GE Fanuc.
Question: What can I expect the VAC (voltage alternating current) included with the IC200MDL143 to be?
Answer: The Emerson - GE Fanuc IC200MDL143 has a voltage alternating current (VAC) of 120.
For additional information about IC200MDL143 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200MDL143.
Revision Part # | Also Known As | Availability |
---|---|---|
IC200MDL143D | IC200MDL143 Series D, Rev D | Request a Quote |
IC200MDL143G | IC200MDL143 Series G, Rev G | Request a Quote |
IC200MDL143H | IC200MDL143 Series H, Rev H | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.