GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC200MDL742 |
| Series: | Versamax |
| UPC: | 48427408801 |
Description:
The GE Fanuc Emerson IC200MDL742 is a discrete logic output module that includes 32 discrete channels. These outputs support a voltage of 24 volts DC. The IC200MDL742 weighs approximately 150 grams (0.33 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Adding Items to Cart
Adding Items to Cart
Looking for a IC200MDL742? We can help!
Request a QuotePay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC200MDL742 is a discrete logic output module that includes thirty-two (32) discrete channels that can be positive logic outputs and support a voltage rating range from 18 volts DC to 30 volts DC. These outputs are grouped into two groups of sixteen (16) outputs (A1 – A16 and B1 – B16) that are labeled with LED indicators to show the status of points. Each group includes the DC+ and the DC- terminals. This device employs the backplane optical isolation offered by optocouplers to provide electrical isolation of 250 volts AC continuously and 1500 volts AC for one minute between groups. The module offers an on and off response time of 0.5 milliseconds. This output module employs 32 bits of discrete output data.
The IC200MDL742 offers protection against short circuits and overcurrent. The device outputs include free-wheeling diodes. The module supports an inrush current of 2 amperes during 100 milliseconds. The processing can be performed by either NIU or a CPU. This module draws a current of 150 milliamperes at a voltage of +5 volts DC. The IC200MDL742 includes two green LED indicators on the faceplate to indicate the power presence on the module when connected to the backplane. Each output has an amber LED indicator to show the overload conditions. These outputs can be involved in many applications and interfaced with resistive and inductive actuators. The IC200MDL742 weighs approximately 150 grams (0.33 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | VersaMax |
| Part Number | IC200MDL742 |
| Description | Positive logic output module |
| Number of I/O points | 32 outputs |
| Output groups | 2 of 16 outputs each |
| Output voltage | +24VDC nominal, Positive Logic |
| Output voltage range | +18 to +30 VDC |
| Isolation | Group to group: 250VAC continuous; 1500VAC for 1 minute |
| Output current | 500 mA |
| On response time | 0.5 ms maximum |
| Off response time | 0.5 ms maximum |
| Internal power consumption | 5V output: 150 mA maximum |
| Weight | 150 g (0.33 lb) |
FAQ
Question: Does Automation Stop offer repairs on the IC200MDL742?
Answer: Yes. We offer repairs for the IC200MDL742 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200MDL742?
Answer: If you buy the IC200MDL742 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200MDL742 online?
Answer: Yes. Automation Stop sells the IC200MDL742 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200MDL742?
Answer: The IC200MDL742 is made by Emerson - GE Fanuc.
Question: What Brand does the Allen Bradley IC200MDL742 have?
Answer: The IC200MDL742 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What Description is included with the Allen-Bradley IC200MDL742?
Answer: The Allen-Bradley IC200MDL742 has a Positive logic output module Description.
Question: What is the Internal power consumption of the Rockwell-Automation IC200MDL742?
Answer: The Rockwell-Automation IC200MDL742 has a Internal power consumption of 5 volts output: 150 mA maximum.
Question: What is the Isolation of the Allen-Bradley IC200MDL742?
Answer: The IC200MDL742 has a Isolation of Group to group: 250VAC continuous; 1500VAC for 1 minute.
Question: What Number of input/output points does the Rockwell Automation IC200MDL742 have?
Answer: The Number of input/output points of the Rockwell Automation IC200MDL742 is 32 outputs.
Question: What is the Off response time of the IC200MDL742?
Answer: The Allen Bradley Automation IC200MDL742 has a Off response time of 0.5 ms maximum.
Question: What On response time does the Allen-Bradley IC200MDL742 have?
Answer: The On response time of the IC200MDL742 is 0.5 ms maximum.
Question: What Output current does the Rockwell-Automation IC200MDL742 have?
Answer: The Rockwell-Automation IC200MDL742 has a Output current of 500 mA.
Question: What is the Output groups of the IC200MDL742?
Answer: The Allen Bradley IC200MDL742 has a Output groups of 2 of 16 outputs each.
Question: What is the Output voltage of the IC200MDL742?
Answer: The Output voltage of the Allen Bradley IC200MDL742 is +24VDC nominal, Positive Logic.
Question: What is the Output voltage range of the Rockwell-Automation IC200MDL742?
Answer: The IC200MDL742 has a Output voltage range of +18 to +30 VDC.
Question: What part Number does the Rockwell Automation IC200MDL742 have?
Answer: The Rockwell Automation IC200MDL742 has a unit Number of IC200MDL742.
Question: What is the Weight of the IC200MDL742?
Answer: The Weight of the Rockwell-Automation IC200MDL742 is 150 g (0.33 lb).
Series information for IC200MDL742
For additional information about IC200MDL742 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200MDL742.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC200MDL742D | IC200MDL742 Series D, Rev D | Request a Quote |
| IC200MDL742F | IC200MDL742 Series F, Rev F | Request a Quote |
| IC200MDL742H | IC200MDL742 Series H, Rev H | Request a Quote |
| IC200MDL742K | IC200MDL742 Series K, Rev K | Request a Quote |
Common Misspellings:
- IC20OMDL742
- IC2O0MDL742
- IC2OOMDL742
- 1C200MDL742
- 1C20OMDL742
- 1C2O0MDL742
- 1C2OOMDL742
