GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC200MDL744 |
| Series: | Versamax |
| UPC: | 395571065771 |
Description:
The GE Fanuc Emerson IC200MDL744 is a discrete logic output module that includes 32 discrete channels. These outputs support a voltage of 5, 12, or 24 volts DC. The IC200MDL744 weighs approximately 250 grams (0.5 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Adding Items to Cart
Adding Items to Cart
Looking for a IC200MDL744? We can help!
Request a QuotePay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC200MDL744 is a discrete logic output module that includes thirty-two (32) discrete channels that can be negative logic outputs and support a voltage rating range from 4.75 volts DC to 5.25 volts DC and from 10.2 volts DC to 30 volts DC. These outputs are grouped into two groups of sixteen (16) outputs (A1 – A16 and B1 – B16) that are labeled with LED indicators to show the status of points. Each group includes the DC+ and the DC- terminals. This device employs the backplane optical isolation offered by optocouplers to provide electrical isolation of 250 volts AC continuously and 1500 volts AC for one minute between groups. The module offers an on response time of 0.2 milliseconds and an off response time of 1 millisecond. This output module employs 32 bits of discrete output data.
The IC200MDL744 supports an inrush current of 2 amperes during 100 milliseconds. The processing can be performed by either NIU or a CPU. This module draws a current of 140 milliamperes at a voltage of +5 volts DC. The IC200MDL744 includes two green LED indicators on the faceplate to indicate the power presence on the module when connected to the backplane. The outputs are either negative or sinking type outputs. These outputs can be involved in many applications and interfaced with resistive and inductive actuators. The IC200MDL744 weighs approximately 250 grams (0.5 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | VersaMax |
| Part Number | IC200MDL744 |
| Description | Negative logic output module |
| Number of I/O points | 32 outputs |
| Output groups | 2 of 16 outputs each |
| Output voltage | 5 VDC-TTL mode: +4.75 to +5.25VDC, +5VDC nominal - 12/24VDC mode: +10.2 to +30VDC, +12/24VDC nominal |
| Output voltage range | 5VDC-TTL mode: +4.75 to +5.25VDC - 12/24VDC mode: +10.2 to +30VDC |
| Isolation | Group to group: 250VAC continuous; 1500VAC for 1 minute |
| Output current | 5VDC-TTL mode: 25 mA maximum - 12/24VDC mode: 0.5A at 30VDC maximum (resistive) |
| On response time | 0.2 ms maximum |
| Off response time | 0.1 ms maximum |
| Internal power consumption | 5V output: 140 mA maximum |
| Weight | 250 g (0.55 lb.) |
FAQ
Question: Does Automation Stop offer repairs on the IC200MDL744?
Answer: Yes. We offer repairs for the IC200MDL744 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200MDL744?
Answer: If you buy the IC200MDL744 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200MDL744 online?
Answer: Yes. Automation Stop sells the IC200MDL744 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200MDL744?
Answer: The IC200MDL744 is made by Emerson - GE Fanuc.
Question: What Brand does the Allen Bradley-Rockwell Automation IC200MDL744 have?
Answer: The Allen Bradley-Rockwell Automation IC200MDL744 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What Description is included with the Allen Bradley Automation IC200MDL744?
Answer: The Allen Bradley Automation IC200MDL744 has a Negative logic output module Description.
Question: What is the Internal power consumption of the Allen Bradley Automation IC200MDL744?
Answer: The Internal power consumption of the Allen Bradley Automation IC200MDL744 is 5 volts output: 140 mA maximum.
Question: What Isolation does the Rockwell Automation IC200MDL744 have?
Answer: The Isolation of the IC200MDL744 is Group to group: 250VAC continuous; 1500VAC for 1 minute.
Question: What is the Number of input/output points of the Allen Bradley IC200MDL744?
Answer: The Number of input/output points of the IC200MDL744 is 32 outputs.
Question: What Off response time does the Allen Bradley IC200MDL744 have?
Answer: The Off response time of the Allen Bradley IC200MDL744 is 0.1 ms maximum.
Question: What is the On response time of the Rockwell Automation IC200MDL744?
Answer: The On response time of the IC200MDL744 is 0.2 ms maximum.
Question: What is the Output current of the IC200MDL744?
Answer: The IC200MDL744 has a Output current of 5VDC-TTL mode: 25 mA maximum - 12/24VDC mode: 0.5A at 30VDC maximum (resistive).
Question: What is the Output groups of the IC200MDL744?
Answer: The Output groups of the IC200MDL744 is 2 of 16 outputs each.
Question: What is the Output voltage of the IC200MDL744?
Answer: The Output voltage of the Allen Bradley/Rockwell Automation IC200MDL744 is 5 VDC-TTL mode: +4.75 to +5.25VDC, +5VDC nominal - 12/24VDC mode: +10.2 to +30VDC, +12/24VDC nominal.
Question: What Output voltage range does the IC200MDL744 have?
Answer: The IC200MDL744 has a Output voltage range of 5VDC-TTL mode: +4.75 to +5.25VDC - 12/24VDC mode: +10.2 to +30VDC.
Question: What unit Number does the IC200MDL744 have?
Answer: The unit Number of the IC200MDL744 is IC200MDL744.
Question: What is the Weight of the IC200MDL744?
Answer: The Weight of the Allen Bradley Automation IC200MDL744 is 250 g (0.55 lb.).
Series information for IC200MDL744
For additional information about IC200MDL744 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200MDL744.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC200MDL744A | IC200MDL744 Series A, Rev A | Request a Quote |
| IC200MDL744H | IC200MDL744 Series H, Rev H | Request a Quote |
Common Misspellings:
- IC20OMDL744
- IC2O0MDL744
- IC2OOMDL744
- 1C200MDL744
- 1C20OMDL744
- 1C2O0MDL744
- 1C2OOMDL744
