GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC200NDD010 |
| Series: | Versamax |
| UPC: | 195584828864 |
Description:
The GE Fanuc IC200NDD010 controller belongs to the Versamax series of products. This controller is a small PLC device, with physical dimensions that measure 75 cm x 80 cm x 47 cm. This device has 6 integrated inputs and 4 PLC outputs and operated via a voltage rating of 12 volts DC. The GE Fanuc IC200NDD010 has a maximum load bracket of 0.7 amperes for each point, as well as a voltage dropoff bracket rated at a maximum of 0.3 volts. The rated off-state leakage rating for this module is 0.1 amperes maximum.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc IC200NDD010 is type of Nano PLC controller from the Versamax series of products with only six (6) inputs and four (4) outputs. All other PLCs in the series have more inputs and outputs, as well as memory. These PLCs, however, are bigger and more expensive. The GE Fanuc IC200NDD010 has an approximate weight of one (1) pound. Additionally, this device has physical dimensions that measure 75 cm x 80 cm x 47 cm (3 inches x 3.3 inches x 1.0 inch). This controller is ideal for use in Class 1 compliant industrial settings, which allows its usage in many hazardous Locations. The Nano PLC works under a program which is located in its memory. For configuration, users can use ladder programming. Users need to connect programming terminals for this purpose. It can also be connected to an external computer using the embedded serial ports. For establishing a connection, the GE Fanuc IC200NDD010 controller comes with both the RS-485 and the RS-232 serial ports.
When programming begins, operators use the six (6) inputs located on the controller to produce four (4) output signals that are connected to motors and other output devices. All the 10 Input/Output points on this Nano PLC come with their own LEDs to indicate visually the status of each point. This unit requires 12 volts direct current (DC) to operate properly. The maximum load bracket for each point of this Nano PLC is 0.7 amperes. The transistor of the GE Fanuc IC200NDD010 PLC comes with a voltage dropout bracket of 0.3 volts maximum. The leakage off-state bracket is 0.1 milliamperes maximum.
FAQ
Question: Does Automation Stop offer repairs on the IC200NDD010?
Answer: Yes. We offer repairs for the IC200NDD010 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200NDD010?
Answer: If you buy the IC200NDD010 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200NDD010 online?
Answer: Yes. Automation Stop sells the IC200NDD010 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200NDD010?
Answer: The IC200NDD010 is made by Emerson - GE Fanuc.
Series information for IC200NDD010
For additional information about IC200NDD010 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200NDD010.
| Revision Part # | Also Known As | Availability |
|---|
Common Misspellings:
- IC200NDD01O
- IC200NDD0I0
- IC200NDD0IO
- IC200NDDO10
- IC200NDDO1O
- IC200NDDOI0
- IC200NDDOIO
- IC20ONDD010
- IC20ONDD01O
- IC20ONDD0I0
- IC20ONDD0IO
- IC20ONDDO10
- IC20ONDDO1O
- IC20ONDDOI0
- IC20ONDDOIO
- IC2O0NDD010
- IC2O0NDD01O
- IC2O0NDD0I0
- IC2O0NDD0IO
- IC2O0NDDO10
- IC2O0NDDO1O
- IC2O0NDDOI0
- IC2O0NDDOIO
- IC2OONDD010
- IC2OONDD01O
- IC2OONDD0I0
- IC2OONDD0IO
- IC2OONDDO10
- IC2OONDDO1O
- IC2OONDDOI0
- IC2OONDDOIO
- 1C200NDD010
- 1C200NDD01O
- 1C200NDD0I0
- 1C200NDD0IO
- 1C200NDDO10
- 1C200NDDO1O
- 1C200NDDOI0
- 1C200NDDOIO
- 1C20ONDD010
- 1C20ONDD01O
- 1C20ONDD0I0
- 1C20ONDD0IO
- 1C20ONDDO10
- 1C20ONDDO1O
- 1C20ONDDOI0
- 1C20ONDDOIO
- 1C2O0NDD010
- 1C2O0NDD01O
- 1C2O0NDD0I0
- 1C2O0NDD0IO
- 1C2O0NDDO10
- 1C2O0NDDO1O
- 1C2O0NDDOI0
- 1C2O0NDDOIO
- 1C2OONDD010
- 1C2OONDD01O
- 1C2OONDD0I0
- 1C2OONDD0IO
- 1C2OONDDO10
- 1C2OONDDO1O
- 1C2OONDDOI0
- 1C2OONDDOIO
